Specifications

Vincent 5756 Vincent
ANALOG
OUTPUT
(
*
)
2 CHANNEL
ANALOG
INPUT
DIGITAL
OUTPUT
(
****
)
DIGITAL
INPUT
SAV-C2
CD, CD-Recorder, DAT,
MD, MD-Recorder
audio
audio
ANALOG
OUTPUT
(
*
)
2 CHANNEL
ANALOG
INPUT
VIDEO
OUTPUT
(
***
)
VIDEO
INPUT
SAV-C2
Video recorder
Multi cannel amplifier
video
audio
ANALOG
OUTPUT
(
*
)
2 CHANNEL
ANALOG
INPUT
SAV-C2
Tuner, Tape,
Phono-Preamplifier
audio
DVD, DVD-Recorder,
SACD, DVD-Audio, etc.
6.1 ANALOG
AUDIO OUTPUT
*) Use an empty socket, depending on the preamplifier input to which you have allocated the
source unit.
**) You generally only have to connect one of the three video connections. This depends on which
standards your AV-sources and the Video display support.
***) If you have a video recorder with an S-Video output, it can be used provided that one of the
preamplifier inputs “DVD/AV2” or “D-TV/AUX2” is not occupied by another source unit and can be
used instead of the preamplifier input “VCR/AUX3” to connect the video recorder.
****) The digital terminals belong to the preamplifier inputs “CD/AV1”, “DVD/AV2”, “D-TV/AUX2” or
“SAT/AUX1”. They can be distributed as desired over them.
You will find the terminals for the power amplifiers in
the “ANALOG AUDIO OUTPUT” terminal field
(16). The multi-channel input “6.1 CHANNEL
ANALOG AUDIO INPUT” (15) must not be confu-
sed with the RCA multi-channel output!
Power amplifier channels for up to 2 pairs of front
speakers (Front: right, left), one Centre speaker,
two Surround speakers (Rear: right, left), one rear
centre speaker (Surround Centre) and up to two
subwoofers can be connected using RCA connecti-
ons in the bottom part of the terminal field. The
additional pair of RCA outputs for the Front signals
(right, left) can be used to carry sound to a second
zone (another room) using a separate stereo
power amplifier and speakers.
Our sketch shows possible connections. Several
mono or stereo power amplifiers and one multi-chan-
nel power amplifier can both be used. As one possi-
ble solution, a multichannel power amplifier is shown
in the sketch.
Connect “FL” and “FR” to the channel inputs of the
power amplifier(s) for the front channels. The “CEN-
TER” connector should be connected to the channel
input of the power amplifier for the centre speaker.
“SL”, “SC” and “SR” should be connected to the
power amplifier(s) for the Surround speakers.
CONNECTION OF ONE OR MORE
POWER AMPLIFIERS AND THE SUBWOOFER
active Subwoofer
AUDIO
IN
passive Subwoofer
Stereo
power amplifier
INPUT
INPUT
Mono power
amplifier
INPUT