Specifications

Vincent

1. POWER

This is the main power switch for turning on and

off the device. The tuner is separated from the

mains voltage when switched off and cannot be

set into a standby state.

2. RDS MODE

With this button the various RDS services can be

displayed on the front panel or the RDS system

can be switched off.

3. TUNING MODE

With this button you determine the functionality of

“TUNING PRESET”: make them do a manual fre-

quency scan, an automatic search run or switch

between saved stations.

4. ST/MONO

With this, one can switch over between stereo

and mono reception in the operating mode “FM”.

It is an important option for receiving FM stations

with weak signals.

5. Display

In normal operation shows either the name of the

selected input channel or frequency and RDS

information of the radio stationed it is tuned to. In

tuner mode additional information about the ope-

ration mode is shown.

6. Number keys

Using these buttons you can input a station fre-

quency or a preset number.

7. AM/FM

This button helps in switching over between recei-

ving FM stations and medium wave stations (AM).

8. MEMORY

This button is required for saving a radio frequen-

cy to one of the station presets.

9. TUNING PRESET :

With these buttons, a search run through the fre-

quency band can be initiated (automatic, manual

or through all station memory).

10. DIRECT: numerical frequency input

After pressing this button, a transmitter frequency

can be entered by using the number buttons

(6)(21), which the tuner then sets up.

FRONT VIEW

1 2 3 4 7 8 9 10

5 6