Owners Manual

Vincent
37
CONNECTION OF SOURCE DEVICES OVER
OPTICAL IN AND COAXIAL IN
The integrated D/A converter makes it possible to receive also digital audio signals via an optical and/or
coaxial cable and to transmit them analogously to the amplifier. Here, the “Optical IN” and “Coaxial
IN” (7) connections serve as input.
Digital audio source with optical signal connection
Digital audio source with coaxial signal connection
DVD, SACD, CD,
TV/Radioreceiver
DIGITAL OUT
Optical digital cable
DVD, SACD, CD,
TV/Radioreceiver
DIGITAL OUT
Coaxial Digital cable (RCA)
SV-200
SWITCHING THE VOLTAGE
This device is equipped with a switch (14) that can be used to change the country-specific voltage from
230 V to 110 V.
Please never actuate the switch during operation! The voltage must only be switched by a techni-
cian, since the device fuse must also be replaced after actuation of the switch! Information about
the device fuse can be found on the back of the device.
Unauthorised actuation of the switch will void any warranty claim!
SV-200