Specifications

Product information

SV-200

The Tube-Line in a compact design, but not "compact" in sound quality - that's how the new SV-200

Hybrid Amplifier from Vincent presents itself as a little brother of the SV-237MK and SV-700.

Despite the construction in midi format, only a few compromises had to be made in terms of tech-

nology. As with the SV-700, we opted for a design based on the SRPP principle (Shunt Regulated

Push-Pull). This provides high dynamics and a low noise level. In the input stage, Toshiba's FET

transistors, which take over the preamplification of the signal, work in combination with two 6N1 tubes,

which then process the signal in terms of sound.

Hybrid full amplifier

tube

Line

PAGE 1
Product information SV-200 Hybrid full amplifier The Tube-Line in a compact design, but not "compact" in sound quality - that's how the new SV-200 Hybrid Amplifier from Vincent presents itself as a little brother of the SV-237MK and SV-700. Despite the construction in midi format, only a few compromises had to be made in terms of technology. As with the SV-700, we opted for a design based on the SRPP principle (Shunt Regulated Push-Pull). This provides high dynamics and a low noise level.
PAGE 2
Product information SV-200 Hybrid full amplifier In the power supply, a toroidal transformer provides sufficient power. To keep the signal constant, we use for the "buffering" Elcos with a total capacity of 13600 µF. The final gain in the output stage is taken over by four additional Toshiba transistors operating in Class AB mode. For connecting various sources, the SV-200 has two analog inputs and two digital inputs (1 x optical, 1 x coaxial).