Specifications

Vincent

11. REC OUT: recording output

If desired, you can connect a recording device

like a CD recorder or a tape recorder to this out-

put. The stereo signal of this output is identical to

the output signal of the selected audio source at

one of the preamplifier INPUTs. It is independent

of the volume setting (5)(20), the Tone Control

(1)(2)(6) and the loudness setting (10). As long as

the preamplifier is muted (17), the “OUTPUT REC”

does not provide the music signal.

12. PRE OUT: preamplifier outputs

With this pair of RCA connectors you can output

the preamplified stereo audio signal of the cur-

rently selected source to power amplifier channels

or an active subwoofer.

13. INPUT: input connectors

Here you find six stereo RCA inputs for the source

equipment with analogue stereo (line level) audio

output.

14. AC 220-240V:

Power Connector with Fuse holder

To establish the power supply, connect the plugs

of the power cable to the device and to a suitab-

le wall outlet. The small plastic housing holds the

fuse. Refer to the security precautions.

15. POWER CONTROL (12V) OUTPUT

At these jack connectors the signals for the on/off

control (Power Control, Trigger) are emitted.

16. SPEAKERS: Speaker connectors

Output sockets with screw clamps for connection

of one or two pairs of loudspeakers. You can use

loudspeaker cables with 4 mm banana connec-

tors. Please refer to the precautions in the section

“Installation” in case two pairs of loudspeakers

are connected.

REAR VIEW

13 16

11 12 14 15