Specifications

Vincent

BUTTONS OF THE REMOTE CONTROL

12. MUTE

Pressing this button once mutes the sound of the

loudspeakers (6) and the preamplifier outputs “PRE

OUTPUT” (9). Pressing it again returns to the origi-

nal volume.

13. DIMMER:

Brightness setting for the display

The brightness of the front panel display (2) can be

reduced in two steps using this button. If you press

it repeatedly, the third actuation switches off the

display.

14. Input Selector Buttons

These buttons are used to select one of the stereo

audio devices connected to the amplifier’s source

inputs for playback.

15. GAIN

With the activation of this function, the output

signal for the power amplifiers (9) and speakers

(6) is reduced by 8 dB and thus the volume of the

attached speakers. It should only be activated if

even at low volume settings the volume is already

very high.

16. BAL L and BAL R: Balance Control

Both keys can be used for changing the volume dif-

ference between right and left speaker if that is

desired.

17. VOLUME





: Volume keys

These buttons change the amplifier’s volume set-

ting for loudspeakers 6) and the preamplifier out-

puts “PRE OUTPUT” (9).