Specifications

Vincent

CONNECTION OF TWO ADDITIONAL

MAIN AMPLIFIER CHANNELS VIA RCA OR XLR

You only need the sockets “PRE OUTPUT” (9) if you want to use one or more separate main amplifier(s)

to supply additional loudspeakers. This makes sense if you intend to use two more loudspeakers for ste-

reo music playback, for example in a separate zone (another room of your home). These loudspeakers

are then connected to the speaker outputs of the additional amplifier(s). The amplifier output connections

“PRE OUTPUT” (9) must be connected with the input connectors of the main amplifier, in most cases label-

led “INPUT”, “POWER AMP IN” or “MAIN INPUT”. Two main amplifier channels can be connected via

RCA cables.

SV-238MK

Stereo main amplifier

INPUT

RCA connection

SV-238MK

Stereo main amplifier

INPUT

XLR connection

Two more main amplifier channels can be connected via XLR cables.

Both outputs reproduce the same stereo music signal of the currently selected source. Instead of the stereo

main amplifier used here two mono main amplifiers can be utilized.