Owners Manual

Vincent

1. POWER: Mains switch

This is the main power switch for turning on and

off the device. When switched off, the device is

disconnected from the mains. The switching ope-

ration is signalled via the cables connected in the

terminal “POWER CONTROL” (14).

2. INPUT: Input Selector

One of the six audio sources connected to the

amplifier inputs can be selected for playback

here. The LED above the dial associated with the

selected input is lit as long as the amplifier

remains switched on and is not muted.

3. PHONES

If desired, you can connect a set of headphones

with an impedance between 32

and 600

this stereo jack. As long as the headphones are

plugged in, the loudspeakers are switched off.

The volume of the headphone can be changed

with the rotary knob “VOLUME” (8)(21). Before

plugging-in a headphone, the volume setting

should be reduced.

4. BASS

For setting the bass proportions (low frequencies)

of the sound.

5. TONE

Bypasses the tone control that has been set with

the BASS and TREBLE dials.

7. Infrared receiver for the remote control

8. VOLUME

The volume of the loudspeakers and the speakers

may be increased or decreased with this knob.

9. MUTE

Pressing this button once mutes the speakers, the rec-

ording output (11) and the preamplifier output (13).

Pressing it again returns to the original volume.

FRONT VIEW

2 8

7 931 4 6