Owners Manual

Vincent

Operation Button(s) Description

Change the bass pro-

portions of the sound

BASS (4)

With the “BASS” control dial on the front of the device you affect the pro-

portion of lower frequencies in the sound. Turning it in clockwise direction

increases the bass intensity and moving it in anticlockwise direction redu-

ces it. In the middle setting the bass proportions of the input signals remain

unchanged. The adjustment of the bass control only has an effect if the but-

ton “TONE” (5) has been pressed. This tone control affects the loudspea-

ker and headphone signals as well as the output “PRE OUT” (13). The

signal of the output “REC OUT” (11) is independent of this.

Switch off tone control

(BASS/TREBLE)

TONE (5)

If the sound is not to be changed, it is recommended that you switch off

the sound control (BASS, TREBLE) with this button on the front of the devi-

ce. When this button is pressed, the sound processing settings in the tone

controllers (4)(6) come into play. If the button is not pressed, the two

sound controllers in the preamplifier are bypassed and the signals from the

source are not changed in terms of their frequency levels. The tone control

affects the signal of the loudspeakers and the “PRE OUT” output (13). The

signal of the “REC OUT” output (11) is unaffected by this.

OPERATING THE APPLIANCE