User's Manual

Playing Audio via BT Connection

1. Turn on sound bar and then short-press the multi-function button to switch to BT mode and the

LED will show ( )

2. Activate the pairing function on your phone of other compatible device and select “VLS-83 Vinoil”

3. When successfully paired, you will hear a tone and the LED indicator will stay on

4. The remote control includes BT mode playback controls

Notes:

• If your paired device is switched off or manually disconnected, the sound bar will automatically

enter pairing mode

• If the connected device is switched off or manually disconnected, the sound bar will automatically

enter pairing successfully connected device will be re-established once you re-enter wireless

range(10 meters). to connect to other devices, repeat the above pairing steps

• There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode even if

no device is paired, so switch off if not in use

Paying Audio via 3.5mm Audio input(Aux)Connection



Connect the sound bar to your PC, tablet, smartphone, TV, of other device using the included

3.5mm audio cable short-press the multi-function button to switch to audio input mode with the LED

indicator lit up (

)

In this mode, playback can only be controlled on your connected device

Note:

For some computers, you may need to access the audio control panel to manually set the

sound bar as below picture

Optical Mode

Use this operating mode to play music from the optical digital input for example from a TV on your soundbar (A).

The TV must have an optical digital output. Use the optical cable supplied to make the connection.

Proceed as follows:

• Connect the optical cable to the optical digital output of your TV.

• Then connect the optical cable to the optical digital input of your soundbar.

1.6m line-in