User's Manual

Coaxial mode

1. Connect the soundbar to your TV using coaxial cable, fully inserting the connectors so they click in.

2. Short-press the Input button on remote or Top cover of sound bar to switch to CO Mode.

3. In TV sound settings, select the soundbar optical connection (‘Audio Out / Coaxial’ ‘Audio System’ or similar)

as the speaker (output for audio) instead of the TV Speakers

4. Set your TV audio format to PCM (digital audio out/ Coaxial) instead of DTS or others

• Switch the TV set and sound bar on. Set the connected TV to “PCM Stereo” or “Stereo 2.0”.

• Start playing on the TV.

• Press the “OPTICAL” button on the remote control to select this mode.

• You can use the volume buttons to adjust the volume to your requirements.

• If you wish, you can change the audio settings using the relevant buttons on the remote control.

1.6m coaxial cable

1.6m optical cable