Owner`s manual

Wood Wine Cabinet Owner’s Manual
VINOTEMP.COM
29
FREQUENTLY ASKED QUESTIONS
Where are Vinotemp wine cabinets made?
Vinotemp wine cabinets are handcrafted in Rancho Dominguez, California, near North Long
Beach, Carson, and Compton (20 minutes from LAX).
What kind of wood is used to make the cabinets?
The standard exterior of our Reserve Series cabinets is white oak unless customized. The
Economy and WC Series cabinets are made of Red Oak or Luan Mahogany unless customized.
The exterior of our Sonoma Series cabinets are made of Cherry Wood Veneer unless
customized.
What is the insulation factor?
The “R” factor is approximately 11.6. The walls of Vinotemp cabinets are 1.75” inches thick,
filled with rigid board insulation, and a vapor barrier on each side to keep the cold air in and the
hot air out.
What is the BTU on standard models?
Unless the W in e-M a t e unit has been upgraded, most cabinets come standard with the WM-
1500CD cooling unit which is 1500BTU. For all cooling units, the model number corresponds
with the BTU rating, with the exception of 220-Volt systems. We offer cooling units from
1500BTU to 8500BTU. Please visit www.Vinotemp.com
to view the latest W in e-M a t e models
and pricing information.
What is the ideal temperature range for the aging of wine?
For both red and white wine, the ideal temperature range for long term storage and aging is
55°F - 58°F . W ine will age more rapidly at higher temperatures.
Can a Vinotemp unit be installed in a closet?
Yes, but the closet must be large enough to have a louver door installed to allow air to circulate.
What if my floor is not level?
All Vinotemp wine cabinets have between 4 to 6 levelers built in. The legs can be adjusted to a
range of 1 inch to level your cabinet.
What kind of wine rack is included in my cabinet?
• Reserve Series: Redwood and Aluminum racking
• Sonoma Series: All Redwood racking
• Economy Series: Wood and Aluminum racking