Owner`s manual

Wood Wine Cabinet Owner’s Manual
4
VINOTEMP.COM
IMPORTANT NOTES
• When you receive your new wine cabinet please follow the Inspection Procedure
on page 6.
• You must wait 24 hours before plugging in your unit for normal operation. This
will allow the lubricant to settle.
• Do not use a ground fault interrupter (GFI).
• Your cooling unit must be plugged into an outlet connected to a 15-A M P
circuit.
• You must use a 3-prong wall receptacle installed by a qualified electrician.
• While loading your cabinet with large quantities of bottles keep the cooling unit
powered off. If the cooling unit runs while the doors are open it will cause excess
condensation, leaking, and a reduction in cooling power.
IMPORTANT: Until you have loaded bottles into your cabinet, do not open both doors
at the same time. The doors are very heavy and when both doors are opened, the
cabinet may tip forward.