GENERAL OPERATING INSTRUCTIONS Remove all external and internal packaging from your appliance. Be sure that all parts have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date. Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. Let the unit rest UNPLUGGED for 24 hours once you have it placed in your home.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ..................................................................... 5 ELECTRICAL CONNECTION ...................................................................................... 6 PARTS AND SPECIFICATIONS ................................................................................. 7 INSTALLATION......................................................................................................... 8-9 OPERATING YOUR WINE COOLER .......................
IMPORTANT SAFETY INSTRUCTIONS • • • • • • • • • • • • • • • • • • • • • • Do not operate this or any other appliance with a damaged cord. Do not operate if housing is removed or damaged. Exercise caution and use reasonable supervision when appliance is used near children. Never allow children to operate, play with or crawl inside the appliance. Keep packing materials away from children.
ELECTRICAL CONNECTION For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong grounding-type plug, and should be used in combination with a properly connected groundingtype outlet. • Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded. • Do not kink or pinch the power supply cord of appliance.
PARTS AND SPECIFICATIONS 1. Control Panel 2. Glass Door Handle 3. Door Hinge 4. Storage Shelf 5. Glass Door 6. 54L Drawer Handle 7. 54L Drawer Door 8. 45L Drawer Handle 9. 45L Drawer Door 10. Adjustable Feet 11. Kickplate Model EL-BWC108-SS Voltage 115V Frequency 60Hz Control Temp Range (2 Zones) Upper: 5-22°C (41-72°F) Lower: 3.9-8°C (Rec. 39-46°F) Refrigerant R600a/1.83Oz Input Power 160W Power Consumption 0.65 kWh/24h Volume 510L (18.0 cu.ft.) Net Weight 272lbs (123.
INSTALLATION § § Remove all packing material before using your wine cooler. IMPORTANT: Before connecting the unit to a power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. ***Add 1/4” (6.
ANCHORING TO THE WALL 1. On the back of the appliance, attach brackets in the same zones shown using adhesive straps. Mark and drill pilot holes for the screws about 8mm into the appliance. Then use a screwdriver to tighten the screws all the way into the appliance. 2. Position the appliance in the desired location. Locate wall studs behind the appliance and mark the location where the bracket on the back of the appliance lines up with a stud.
INSTALLING THE HANDLE This wine cooler includes a stainless handle that is not required to operate this unit. To install the handle please follow the below instructions: ① Pull away the door gasket in the area where the handle is to be installed. You can see two designated holes for handle installation. The gasket is easily displaced by hand, no tools are necessary. ② Install the handle tightly as shown below with the two screws, lock washers and flat washers provided.
To set the desired temperature for the upper or lower zone, press the Temperature Set button, and then use the Temperature up and down buttons to set the zone to the desired temperature. The Light button can be used to turn the light within the cooler on and off. °C / °F – To toggle the temperature display between Celsius and Fahrenheit, press the button for 3 seconds. NOTE: If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit.
RACKING CONFIGURATION Disperse your bottles evenly throughout the unit so as not to concentrate weight in any one area. This also helps to provide an even temperature range throughout the unit. Make sure that bottles are not all grouped together either at the top or bottom of the cabinet. The maximum capacity per shelf is 20kgs. Never try to pull out more than one rolling shelf at a time as it can cause the appliance to tip forward.
CARE AND MAINTENANCE CLEANING YOUR BEVERAGE COOLER IMPORTANT: Always unplug the unit before cleaning or performing maintenance. Never use harsh cleansers or scouring pads to clean any part of the unit. • Turn off the power, unplug the appliance, and remove all items including shelves. • Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. • Wash the shelves with a mild detergent solution.
PROBLEMS WITH YOUR WINE COOLER You can solve many common wine cellar problems easily, saving you the cost of a possible service call. Try the suggestion below to see if you can solve the problem before contacting Vinotemp at Info@Vinotemp.com. TROUBLESHOOTING PROBLEM Door will not close properly Wine Cellar does not operate Wine Cellar is not cold enough Wine Cellar is turning on and off frequently Light does not work POSSIBLE CAUSE • • • • The wine cellar is not level.
• Wine Cellar seems to make too much noise • • • • Fan is always running Condensation forming inside of the cabinet Frost appears in cabinet (on back) • • • • • • A faint humming noise may come from the flow of the refrigerant, which is normal. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerator in your wine cellar. Contraction and expansion of the inside walls may cause popping and crackling noises. The wine cellar is not on a level surface.
packaging or shipper mishandling. Vinotemp is authorized defective returned product that arrives damaged. Initials ________________ authorized to reject any Accept Terms & Conditions Date ________________ Vinotemp International Corp. (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agrees to the following terms and conditions of the sale: Shipping/Delivery fees are the responsibility of the Purchaser whether freight prepaid or freight collect.
unauthorized repairs. If the repair or unauthorized part damaged the unit, we will provide customer a cost to repair that damage. California Proposition 65 Warning: The products sold on this ecommerce website and to the public may contain chemicals and other substances known to the State of California to cause cancer and birth defects and other reproductive harm.
the goods. Built to Order and Custom products are nonreturnable, nonrefundable. Purchaser must notify Seller of nonconforming goods within 48 hours of receipt, after which time all goods are deemed accepted by the Purchaser. If an order has been placed and production has not started, cancellation of your order will be a 15% charge.
accessories. If a model is not listed here will have 90 day warranty on parts only if it’s a new item. Parts and Repairs: Warranty on in-house repairs: 90 days parts and labor for compressor; 30 days parts and labor for Thermoelectric; Customer is required to put down a labor deposit of $75 for Thermoelectric units; $150 for compressor based Wine Coolers and $195 for WineMate units which will be kept if a unit is found to be in good working condition. Customer is responsible for freight costs to us.
control of the Seller, whether similar or dissimilar to the foregoing. Seller is not responsible for any damages caused to Purchaser's property resulting from the goods. This limited warranty applies only inside the Continental US (Alaska, Puerto Rico, Hawaii and other territories/countries are not warranted). Purchaser understands and acknowledges that the goods sold here are wine cellars, cigar humidors, and/or other similar units which house wine or cigars or other items.
place of business or residence due to the size of the goods or otherwise, such as the disassembly and reassembly of the goods. Purchaser assumes all responsibility for delivery, payment of freight, extra fees, access, measurement, installation, hook-up, moving and storage of the goods.
Seller, whether similar or dissimilar to the foregoing. Seller is not responsible for any damages caused to Purchaser's property resulting from the good. This limited warranty applies only inside the Continental US. (Alaska, Puerto Rico and Hawaii are not warranted.) 7. Purchaser understands and acknowledges that the goods sold here are wine coolers, appliances, cigar humidors, and/or other similar units which may house wine or cigars or other consumables.
SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING: Please do not place the unit within reach of children. For adult use only. Contact info@vinotemp.com with any questions or visit www.vinotemp.com 732 S.