BR-300GREF SINGLE-ZONE FRIDGE 732 South Racetrack Road, Henderson, NV 89015 | 1.800.777.8466 | info@vinotemp.com | www.vinotemp.
PRODUCT REGISTRATION Purchase Confirmation With the information you provide, we can confirm the date of purchase for your product. The confirmation is of benefit to you, especially if your original proof of purchase is lost. Product Registration Completing this product registration is the only way to guarantee you will be notified of substantive issues that arise concerning your product.
GENERAL OPERATING INSTRUCTIONS Remove all external and internal packaging from your appliance. Be sure that all parts have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date. Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. Let the unit rest UNPLUGGED for 24 hours once you have it placed in your home.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS................................................................................. 5 ELECTRICAL CONNECTION.....................................................................................................6 PARTS AND SPECIFICATIONS................................................................................................ 7 BOTTLE CAPACITY......................................................................................................................
IMPORTANT SAFETY INSTRUCTIONS Do not operate this or any other appliance with a damaged cord. Do not operate if housing is removed or damaged. Exercise caution and use reasonable supervision when appliance is used near children. Never allow children to operate, play with or crawl inside the appliance. Keep packing materials away from children. Before performing any maintenance or cleaning, ensure that the unit is unplugged or that the power line is disconnected.
ELECTRICAL CONNECTION For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong grounding-type plug, and should be used in combination with a properly connected groundingtype outlet. Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded. The cord should be secured behind the unit and not left exposed or dangling to prevent accidental injury.
PARTS AND SPECIFICATIONS Foaming door Black stainless steel handle 4. Foaming door Glass shelves MODEL No. BR-300GREF Voltage AC 115V Frequency 60Hz Ambient Temp Range 41-100°F / Humidity 45-90% Control Temp Range upper zone:47-57 °F lower zone:56-65 °F drawer:34-47 °F Refrigerant R600a/1.76OZ Power Consumption 1.39kWh/24h Input Power 370W Volume 21.2cu.ft Net Weight 282 lbs Gross Weight 298 lbs Dimensions (WxDxH) 29.5in x27.1in x74in Box Dimensions (WxDxH) 30.9in x29.1in x75.
BRAMA BR-300GREF SINGLE ZONE FRIDGE You may adjust the glass shelves of your fridge/ cooler to accommodate more or less bottles. If stacking the cans on top of each other, please do not pull out the shelves. You can also store fresh food, frozen food, wine or beverages. W W W .V IN OT E M P.
INSTALLATION Remove all packing material before using your fridge. IMPORTANT: Before connecting the unit to a power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. This unit is designed for freestanding or built in installation but indoor use only. Position the unit in a dry and well-ventilated place. Avoid placing the wine cooler near any source of heat or moisture, or in direct sunlight.
INSTALLING THE HANDLE This fridge/ cooler includes a handle that is not required to operate this unit. To install the handle please follow the below instructions: Locate the handle(1) over the pin(3) of the door and tighten the handle by screwing the Allen key grub screws(2). CAUTION:do not overtighten the screws. INSTALLING THE CHARCOAL FILTER To install the charcoal filter, please follow the below instructions: Place the carbon filter on top the wooden shelf.
The controls of your fridge ① Up Used to raise (warm) the set temperature by 1°C or 1°F. ② Temperature Display ③°C/°F Display ④ Down Used to lower (cool) the set temperature by 1°C or 1°F. ⑤ Set Temperature Press this button, press UP/DOWN mark to set temperature. To view the “set” temperature at any time, touch the UP or DOWN mark, the “set” temperature will temporarily “flash” in the LED display for 5 seconds. ⑥ °C/°F Selector Select the temperature display setting in Fahrenheit or Celsius degree.
this unit appliance. You may also store fresh food, frozen food, and beverages or wines. g the glass shelves out. beverage cooler fridge/ 12 W W W .V IN OT E M P.
CARE AND MAINTENANCE CLEANING YOUR FRIDGE IMPORTANT: Always unplug the unit before cleaning or performing maintenance. Never use harsh cleansers or scouring pads to clean any part of the unit. Turn off the power, unplug the appliance, and remove all items including shelves. Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. Wash the shelves with a mild detergent solution.
PROBLEMS WITH YOUR FRIDGE Most common problems can be solved easily, saving you the cost of a possible service call. Try the following suggestions to see if you can solve the problem before contacting Vinotemp at Info@Vinotemp.com. TROUBLESHOOTING PROBLEM The unit does not operate The unit is not cold enough The unit turns on and off frequently The unit light does not work The unit makes too much noise or vibrates POSSIBLE CAUSE Ensure unit is plugged into an electrical outlet.
Terms of Sale Shipping/Delivery fees are the responsibility of the Purchaser. Seller is not responsible for the carrier’s missed/Non delivery for any reason. Delivery is curbside. Optional upgrades in delivery service is an additional fee. If upgraded delivery service cannot be performed properly, Purchaser agrees to accept delivery curbside and the difference in upgraded cost will not be refunded.
have original and/or proper packaging. Swap-outs (Delivery and Pick up are at the same time) Original unit must be packed and ready for carrier pick up at time of delivery of new unit. Packaging of old unit must be adequate for shipping, not oversized or on a pallet if unit was not originally delivered on a pallet. Carrier will not drop off new unit if the original unit is not ready.
OPEN AND INSPECT YOUR DELIVERY. When FOB Destination, if the item is damaged by the freight company, and Purchaser cancels rather than accepts a replacement, the order can be cancelled by paying for freight costs both ways and a 35% restocking fee for stocked items. No cancellation or refunds on custom/made or made to order products. When shipped 3rd Party (FOB Warehouse), Purchaser assumes all responsibility for delivery, payment of freight and freight claims for damages during shipment.
Wine Accessories, Racking Systems, Parts and Other miscellaneous items is a 30 day warranty. Il Romanzo units: Warranty 90 (ninety) days. Replacement part 12 (twelve) months from the date of sale. Brama: 1 year warranty from date of purchase. Non-New Units (Scratch & Dent/Refurbished/Floor Models), warranty for compressor units is 90 days from your dated invoice and 30 days for thermoelectric units (parts for function only, not cosmetic defects).
Storage Fees: When having an item serviced by a Vinotemp service technician at the Vinotemp facility, Purchaser agrees to pick up their repaired item or make arrangements for return shipping within a 30 day period once they have been notified by Vinotemp through phone call, email, or letter that their unit is ready for pick up. If the item remains in the Vinotemp warehouse after 30 days but no longer than 60 days, the Purchaser will incur additional storage fees of 2%.
We each agree that any dispute resolution proceedings will be conducted only on an individual basis and not in a class, consolidated or representative action. If for any reason a claim proceeds in court rather than in arbitration we each waive any right to a jury trial. Both parties agree to bring suit in court to enjoin infringement or other misuse of intellectual property rights.
4. LIMITED WARRANTY on Non-New Units (Scratch & Dent/Refurbished and Floor Models): warranty for compressor units is 90 days from your dated invoice and 30 days for thermoelectric units (parts for function only, not cosmetic defects). These units are refurbished and sold as is; Purchaser assumes risks to the quality and performance of goods and assumes the costs of all necessary service or repair not covered herein. Wine Accessories, Racking Systems and other items not mentioned are not warranted.
9. In the event of any dispute between Seller and Purchaser arising out of or relating to these terms and conditions or to the goods sold generally, Purchaser must first file a written claim with Seller within thirty days of the occurrence giving arise to the claim and wait an additional thirty days for a response before initiating any legal action.
732 South Racetrack Road, Henderson, Nevada 89015 U.S.A. 1.800.777.8466 | info@vinotemp.com | www.vinotemp.
SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING: Please do not place the unit within reach of children. For adult use only. Contact info@vinotemp.com with any questions or visit www.vinotemp.com 732 S.
