Use and Care Manual

Wood Wine Cabinet Owner’s Manual
28
VINOTEMP.COM
Noisy operation
a. Wine-Mate unit’s
mounting area is not
secure
b. Loose parts
c. Compressor
overloaded due to
high ambient
temperatures or
airflow restriction
d. Malfunctioning
components
a. Add support to improve
installation
b. Check fan blades, bearings,
cabinet washers, tubing
contact and loose screws
c. Check for airflow blockage
d. Call service at 1-800-
777-VINO
Mold/mildew
a. Wine/liquid spillage
a. Ensure the humidity is set
between 50-70%
b. Immediately wipe up spills as
they occur
c. Empty the cabinet and
thoroughly clean it. If you
have a large mold infestation,
it is recommended you
consult a mold remediation
professional.
d. Put on safety goggles and a
dust mask. If you have family
members with asthma or
mold allergies, make sure
they are not nearby while you
work.
e. Vacuum the moldy wood with
a HEPA-filter vacuum, using
the brush attachment if it has
one. This removes any loose
spores and bits of mold that
might otherwise enter the air
while you clean the wood.
f. To remove the remaining
mold, use one of the
following methods:
1. Add a 3% hydrogen
peroxide solution to a spray
bottle and saturate the
surface of the racks to kill the
mold and spores. Let it sit for
15 minutes then gently scrub
the surface using a clean,
soft cloth.