Use and Care Manual

Wood Wine Cabinet Owner’s Manual

VINOTEMP.COM

CABINET DISASSEMBLY/REASSEMBLY

DISASSEMBLY INSTRUCTIONS

1. Top Panel

2. Door(s)

3. Right Panel

4. Bottom Panel

5. Foot

6. Screws (used for #7)

7. Leg Rail

8. Screws (used for panels)

9. Hinge(s)

10. Rear Panel

11. Left Panel

Tools required for disassembly:

 7/16” wrench

 Phillips screwdriver

 4mm hex wrench (Allen

wrench)

 ¼” nut driver

Note: 2-3 people are required to

complete cabinet disassembly.

Remove racking first. Also, some

units are equipped with a horizontal

stabilizing bar which must be

removed first.

1. Remove shipping carton and packing material with the exception of the pallet. Open

door and remove the plastic bag containing four or six casters depending on the size

of the unit. The number of casters provided will depend on the size of the unit.

2. Place the cardboard on the ground behind the wine cabinet.

3. Removing the Cooling Unit: With the 7/16” wrench, remove the three bolts at the

top of the cooling unit. Carefully slide the unit out and place it on the ground out of the

way in an upright position.

4. Removing the Door(s): Carefully remove the screws that are on the cabinet side of

the hinge making sure someone is holding the door while screws are being removed.

Place the door on the cardboard to the side of the wine cabinet.

5. Removing the Wine Rack: With the Philips Head Screwdriver or ¼” Nut Driver,

carefully remove the screws located at the top back of the rack. These screws hold

the bottle racks in place. (Standard Cellar Trellis Wine Racks) Note: Some models

come with horizontal bar support (single door 440 and single door 400). This bar must

be removed prior to removing the wine rack.