Operating instructions

ManualsBrandsVinotemp ManualsKitchen AppliancesVT-12TEDS

W W W . V I N O T E M P . C O M

A P R O U D H E R I T A G E O F E X P E R I E N C E & Q U A L I T Y

O W N E R ’ S M A N U A L

W I N E C O O L E R

VT- 1 2 T E D S - 2Z

Summary of content (12 pages)

PAGE 1
A PROUD HERITAGE OF EXPERIENCE & QUALITY WINE COOLER VT-12TEDS-2Z O W N E R ’ S M A N U A L W W W . V I N O T E M P .
PAGE 2
Your wine cellar This unit can be used for Storage and/or Service. The unit has a glass door and soft interior light that you can leave on to elegantly display your wine. Serving Wines Storing wines at the proper temperature is important. To preserve them as long as possible wine should be stored at approximately 55° Fahrenheit. However, the chart below suggests the optimal drinking temperature for the different styles of wine.
PAGE 3
General Operating Instructions Remove all external and internal packaging from your wine cooler. Be sure that all parts have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date. Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com.  Please fully read the instruction manual.
PAGE 4
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .............................................. 5 ELECTRICAL CONNECTION ............................................................ 5 CABINET DIAGRAM ...................................................................... 6 TECHNICAL DATA ........................................................................ 6 INSTALLATION ............................................................................ 7 OPERATING YOUR WINE COOLER.................................
PAGE 5
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:  Ensure that the wine cooler stays in the upright position during transportation.  Place the wine cooler on a strong, level surface.  This wine cooler is designed for indoor, household use only. Any other use will void the warranty.
PAGE 6
CABINET DIAGRAM 1. 2. 3. 4. 5. Plastic Cover Stainless Steel Handle Control Panel Wooden Shelf Leveling Leg 6. 7. 8. 9. 10. Hinge Cover LED Light Fan Mask LED Light Fan Mask TECHNICAL DATA Model no. VT-12TEDS-2Z Capacity 12 bottles Volume 34 liters Voltage AC 110V Frequency 60 Hz Input Power 130W Power Consumption (kWh/24h) Temperature Range 46°- 64° F Net Weight 29.7 lbs Gross Weight 34.1 lbs Unit Size (W x D x H) Packing Size (W x D x H) 6 1.5 13.625" x 18.75" x 21.375" 15.
PAGE 7
INSTALLATION       Remove all packing material before using your cooler. Check to be sure all parts are included and that the cooler is in good condition. Clean the interior surface with a soft cloth and lukewarm water. Position the cooler in a dry and airy place. The recommended ambient temperature should be between 50° and 80°F. Place your cooler on a solid, level surface (other than carpet). This will ensure vibration and noise-free operation.
PAGE 8
CARE AND MAINTENANCE Cleaning Your Wine Cooler  Unplug the wine cooler and remove all bottles and shelves.  Wash the inside with warm water and a neutral detergent or baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. Do not use abrasive cleaners.  The outside of the wine cooler should be cleaned with mild detergent and warm water. Clean the back and bottom of the wine cooler thoroughly to ensure efficient operation.  Wipe dry with a soft cloth.
PAGE 9
PROBLEMS WITH YOUR WINE COOLER Most common problems can be solved easily, saving you the cost of a possible service call. Refer to the guide below to solve possible issues. Try the suggestions below to see if you can solve the problem before contacting Vinotemp at info@vinotemp.com.
PAGE 10
TERMS OF SALE AND WARRANTY Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agree to the following terms and conditions of the sale: Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect.
PAGE 11
W W W . V I N O T E M P .
PAGE 12
SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING: Please do not place the unit within reach of children. For adult use only. Contact info@vinotemp.com with any questions or visit www.vinotemp.com 17621 S.