Owners manual

1
0
10
WWW.VINOTEMP.COM
SHELVES
To avoid damaging the door gasket, ensure that the door
is fully opened when pulling the shelves out of the rail
compartment.
• The pull-out shelves allow bottles of wine to be
viewed and removed more easily. Any of the
extension shelves can be removed to store larger
bottles.
• For easy access to the storage bottles, you must pull the shelf approximately ⅓ out of the rail
compartment. This unit was designed with metal stop posts on each side of the shelf track to prevent
bottles from falling.
• When removing a shelf from the rail compartment, make sure to remove all items first. Then move the
shelf to the position such that one of the metal stop post is in the center of the hole and pull up.
Repeat this step with each of the metal stop posts until the shelf can be removed from the sliding track.
D I S P L A Y R AC K
5 wine bottles can be arranged on the display rack for wine presentation.
To install the display rack:
• Remove the shelf directly above the shelf you want to put the
display rack on. (Note: Display rack cannot be put on the top
shelf or the shelf directly below control panel.)
• Pull out the shelf where the display rack will be placed. Place the
display rack on it.
• Align metal hooks of display rack with the wine shelf. Make sure
the display rack is securely on the shelf.
DOOR LOCK
The wine cooler comes with a lock and key combination. The keys are located inside the plastic bag
containing the Owner’s Manual. To unlock the door, insert the key into the lock and turn it counter-clockwise.
To lock the door, insert the key and turn it clockwise, ensuring that the metal pin is fully engaged.
DEFROSTING
The wine cooler defrosts automatically. The evaporator behind the rear wall of the unit automatically defrosts
and the condensate collects in the drainage channel behind the rear wall of the unit, and flows through the
drainage hole into the drip tray by the compressor, where it evaporates.