Owners manual

9
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]
ºF/ºC Selector
Choose to display temperature setting in Fahrenheit or Celsius. To change the temperature display from
Fahrenheit to Celsius or from Celsius to Fahrenheit, touch and hold for 5 seconds.
Key Lock
After 2 minutes of inactivity, the controls will be locked automatically. To release the lock, touch the and
at the same time for 5 seconds.
TEMPERATURE ZONES
The wine cooler has two temperature zones with a temperature range of 40°-72°F. The recommended
temperature setting for each zone is:
• Lower Zone between 55°-72°F (Ideal for red and white wines)
• Upper Zone between 40°-55°F (Ideal for sparkling and white wines)
NOTE: The temperature set for the Lower Zone must always be the same or higher than the
temperature set for the Upper Zone. For optimal performance, the set temperature of the two zones
should differ by at least 4°F.
SETTING A TEMPERATURE
• Touch SET to set the internal temperature for each zone. The degrees indicators will appear in the
display window marked for UPPER ZONE and for LOWER ZONE.
• When you touch SET for the first time, the LED readouts will show the original temperature settings
(preset factory setting for UPPER ZONE is 10ºC / 50ºF and for LOWER ZONE is 16ºC / 60ºF).
• Touch SET once. The left LED indicator for UPPER ZONE will flash. Then touch UP or DOWN to
set the desired temperature.
• When you touch SET again, the right LED indicator for LOWER ZONE will flash. Then proceed to touch
the UP or DOWN to set the desired temperature for the LOWER ZONE.
• The temperature will increase b y 1°C or 1ºF if you touch UP once, or the temperature will decrease b y
1°C or 1ºF if you touch DOWN once.
• To view the set temperature in either zone at any time, touch UP or DOWN and the set temperature
will temporarily flash in the LED display for 5 seconds. You can touch SET to view the temperature
setting from one zone to the second zone.
NOTE: When using the unit for the first time or after a long period of inactivity, there may be a variance of a
few degrees between the selected temperature and the temperature indicated on the LED readout. This is
normal due to the length of inactivity, and will correct itself after the unit is run for a few hours. If the unit is
unplugged, has lost power or is turned off, wait 3 to 5 minutes before restarting the unit. The unit will not
restart before this time delay.
STORING WINE
You can place 70 standard bottles in the upper zone with 10 bottles on each
shelf and 72 standard bottles in the lower zone with 10 bottles on each full
size shelf and 6 bottles on each half-s i z e shelf. Approximate wine cooler
capacity is 142 bottles.
Note: Bottle capacities are approximate maximums when storing traditional
Bordeaux 750 ML bottles and m a y include bulk storage. Many bottles differ in
size and dimensions. As such, the actual number of bottles you may be able
to store may vary.
10 Bottle Arrangement
6 Bottle Arrangement