Operating instructions

OPERATING YOUR WINE COOLER

CONTROLS

Power

To turn the appliance ON or OFF, touch the and at the same time for 5 seconds.

Set

Set or view the internal temperature setting for each zone.

Light

Turn the inner light ON or OFF.

Raise the set temperature by 1°C or 1°F.

Down

Lower the set temperature by 1°C or 1°F.

ºF/ºC Selector

Choose to display temperature setting in Fahrenheit or Celsius. To change the temperature display from

Fahrenheit to Celsius or from Celsius to Fahrenheit, touch and hold

for 5 seconds.

Key Lock

After 2 minutes of inactivity, the controls will be locked automatically. To release the lock, touch the and

at the same time for 5 seconds.

TEMPERATURE ZONES

The wine cooler has two temperature zones with a temperature range of 40°-72°F. The recommended

temperature setting for each zone is:

• Lower Zone

between 55°-72°F (Ideal for red and white wines)

• Upper Zone

between 40°-55°F (Ideal for sparkling and white wines)

NOTE: The temperature set for the Lower Zone must always be the same or higher than the

temperature set for the Upper Zone. For optimal performance, the set temperature of the two zones

should differ by at least 4°F.

SETTING A TEMPERATURE

• Touch SET to set the internal temperature for each zone. The degrees indicators will appear in the

display window marked

for UPPER ZONE and for LOWER ZONE.

• When you touch SET

for the first time, the LED readouts will show the original temperature settings

(preset factory setting for UPPER ZONE is 10ºC / 50ºF and for LOWER ZONE is 16ºC / 60ºF).

• Touch SET

once. The left LED indicator for UPPER ZONE will flash. Then touch UP or DOWN to

set the desired temperature.