A PROUD HERITAGE OF EXPERIENCE & QUALITY Wine Cellar VT-18TEDS (18 bottle) O W N E W W W R . ’ V S I M N O A N U A L T E M P .
YOUR WINE CELLAR This unit can be used for Storage and/or Service. The unit has a glass door and soft interior light that you can use to elegantly display your wine. SERVING WINES Storing wines at the proper temperature is important. To preserve them as long as possible wine should be stored at approximately 55° Fahrenheit. However, the chart below suggests the optimal drinking temperature for the different styles of wine. 2 °C °F Wine Style 19 66 Armagnac, Brandy, Cognac 18 64.
TABLE OF CONTENTS GENERAL OPERATING INSTRUCTIONS........................4 IMPORTANT SAFETY INSTRUCTIONS ..........................4 ELECTRICAL CONNECTION .......................................5 CABINET AND CIRCUIT DIAGRAM ..............................6 TECHNICAL DATA ....................................................7 INSTALLATION INSTRUCTIONS .................................8 OPERATING YOUR WINE CELLAR ...............................8 CARE AND MAINTENANCE ........................................
GENERAL OPERATING INSTRUCTIONS Remove all external and internal packaging from your wine cellar. Be sure that all parts have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date. Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com.
• • • • • • • • • Never lift or carry the wine cellar by the cord. Keep the cord away from heated surfaces. This wine cellar is for household use only. Designed for indoor use. Any other use will void the warranty. Do not plug into the power socket before set up is completed. Always unplug an appliance from outlet when not in use. Never pull cord to remove plug from outlet. Grasp plug and pull to disconnect. WARNING: Risk of child entrapment. Junked or abandoned appliances are still dangerous.
CABINET DIAGRAM 1. Light Switch 7. Shelf 2. Temperature Control 8. Leg 3. Door Handle 9. Water Box 4. Shelf 10. Magnetic Seal 5. Light 11. Glass 6. Fan 12. Door Frame CIRCUIT DIAGRAM 6 W W W . V I N O T E M P .
TECHNICAL DATA Model No. VT-18TEDS Capacity 48L / 18 Bottles Voltage 110V Current 1A (59°) Protection Class I Frequency 60Hz Climate Class SN;N Input Power 70W Power Consumption kW · h/24h 1 (@59°) Temperature Range 54-66°F Approx. Net Weight 35.2 Lbs Approx. Gross Weight 38.8Lbs Approx. Unit Size (HxWxD) Approx. Packing Size (HxWxD) 14"x25.4"x19.8" 16.2"x26.3"x21.8" 17631 S. Susana Road, Rancho Dominguez, CA 90221 info@vinotemp.
INSTALLATION INSTRUCTIONS Before Using Your Wine Cellar: • Remove any exterior and interior packing material. • Check to be sure the following parts are included: ♦ For 18-Bottle Wine Cellar, 5 slide out shelves. ♦ 1 instruction manual. • Before connecting the appliance to the power source, let it stand upright for approximately 12 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
Using the Buttons on the Display Panel You can set the temperature by pushing the control buttons. There are two buttons on the panel “ + ” and “ - ” to adjust the temperature by 1°F increments from 54-66°F. You can turn the interior light on or off by pressing the light button. CARE AND MAINTENANCE Cleaning Your Wine Cellar z Unplug the wine cellar and remove the bottles. z Wash the inside with a warm water and baking soda solution.
PROBLEMS WITH YOUR WINE CELLAR You can easily solve many common wine cellar problems, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before contacting Vinotemp at info@vinotemp.com. TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE Wine cellar does not operate • • • • Light does not work Vibrations • Not plugged in. Using wrong voltage The circuit breaker tripped or a fuse is blown.
TERMS OF SALE AND WARRANTY Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agree to the following terms and conditions of the sale: Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect.
SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING: Please do not place the unit within reach of children. For adult use only. 17631 S. Susana Road Rancho Dominguez, CA 90221 www.vinotemp.
