Installation Guide

17631 South Susana Rd., Rancho Dominguez, CA 90221 U.S.A.
Toll Free: 800.777.8466 FAX: [phone] [e-mail]
www.Vinotemp.com
1.
Attach the Additional
adaptor
to the green cover
Lift up the green tab
and put the keg
into the unit
Close the door
Fill the Cleaning Bottle
to the half way point
with warm water
3.
Attach the beer
supply hose
Connect the Supply Lines,
Open the beer tap and
put the water through it
Install the Dispensing Kit
5.
INSTALLATION*
* There are 2 major types of 5 litter kegs on the market: a) without pressure system inside, b) with pressure system inside
(similar to Heineken kegs). The second type does not requere CO2 Cylynders. Please put the CO2 regulator in
“OFF” postion before serving beer from these type of kegs.
CLEANING INSIDE
THE UNIT
PRESSURIZED KEG
Open the door using
the snaps
1. 3.2.
2.
4.