Table of contents Safety instruction and warnings ........................................................................... 2 - 3 Transporting and unpacking ...................................................................................... 4 Installation instructions .......................................................................................... 5 -7 Before installation of your appliance ................................................................... 5 Tools you will need .............
Safety instructions and warnings IMPORTANT SAFETY INSTRUCTIONS WARNING: Before the appliance is used, it must be properly positioned and installed as described in this manual. Therefore, please read the manual carefully. To reduce the risk of fire, electric shock or injury when using the appliance, follow basic precautions, including the following: To prevent injury or damage to the appliance, the appliance should be unpacked and set up by two people.
Safety instructions and warnings Children in the household Grounding instructions DANGER, RISK OF CHILD ENTRAPMENT! Before you throw away your old appliances: Take off the door. Leave the shelves in place so that children may not easily climb inside. This appliance must be grounded. If the power socket of the home system is not grounded in accordance with the current legal regulations, connect the appliance to the grounding lead itself after consulting a specialized technician.
Transporting and unpacking If the appliance is transported in a horizontal position, the oil from the compressor may leak into the cooling circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before turning it on, so that the oil flows back into the compressor. all papers and adhesive tape from the appliance, doors and other parts packed in polystyrene. Remove documents and accessories from inside the appliance.
Installation instructions NOTE: For free standing installation, allow at least 4” of clearance at the back, sides and top of the unit to permit the proper air circulation to cool the compressor and condenser. Even for built-in installation, you should provide the following clearances to ensure the best operation and proper ventilation: 3/16” on both sides, 2” at the rear and 1/16” at the top. Take care that the air vent at the front of the appliance is never covered or blocked in any way.
Installation instructions Built-in installation dimensions (mm/in) If your appliance is to be built-in, use the dimensions in the diagram and chart below as a guide when installing: Model VT‐ DSODREF VT‐ DSODREF‐L A 660mm (26″) 660mm (26″) B 610mm (24″) 610mm (24″) C 883mm (34 ¾″) 883mm (34 ¾″) D 152mm (6″) 152mm (6″) E 51mm (2″) 51mm (2″)
6
Installation instructions Replacing cabinet legs with casters Notes: Unplug the power cord and release the brake before moving the cabinet. Do not put any goods on top of the cabinet and avoid slanting the cabinet when moving it. Push the cabinet from the rear making sure the door does not open. To avoid short circuits, please do not use the cabinet in bad weather. Position the cabinet under a canopy. Do not let children climb on the cabinet or move the cabinet to another location.
Operation Operating conditions Proper operation of the appliance is guaranteed only if the following conditions are met: Maximum ambient relative humidity: RH75%. The appliance must be placed at a sufficient distance from heat sources ( e.g., ovens, central heating, direct sunlight, etc.). The appliance must be located in such a place that it is protected against the effects of weather. Regular maintenance is performed according to the instructions in this user’s manual.
Operation Defrosting Functions Temperature Memory Function If the power is suddenly lost, the set temperature will be remembered by the unit and once the power is back on, the unit will be at the same set temperature. “Close Door” Reminder Function When you forget to close the door or the door is not fully closed, there will be a warning alarm after 5 minutes.
Beverage storage The unit can store a maximum of 123 beverage cans (12 oz) , and 2 gallonsize milk bottles. See Fig. B for detailed storage method. Location A: each full-size glass shelf can hold 35 beverage cans (12 oz). Location B: smaller glass shelf can hold 28 beverage cans (12 oz3). Location C: bottom of the unit can hold 13 beverage cans (12 oz). Location D: each storage bin can hold 6 beverage cans (12 oz).
Cleaning and care Cleaning the appliance Before cleaning the appliance, disconnect it from the power source. cleaners on the plastic parts. Moving Wipe the internal surfaces of the appliance with a soft sponge lightly dipped in a solution of table salt. (Add 2 tablespoons of salt to a quart of warm water.) Wash the shelves in warm water with a small amount of kitchen dishwashing liquid, rinse and wipe dry.
Problems with your appliance? You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. Troubleshooting guide Problem Possible cause Appliance does not operate. Not plugged in. The appliance is turned off. Tripped circuit breaker or blown fuse. Appliance is not cold enough. Check the temperature control setting. External environment may require a higher setting.
13
Printed in China 14 Printed in China 15