A PROUD HERITAGE OF EXPERIENCE & QUALITY Portable Ice Maker VT-ICEMP25 O W N E R ’ S M A N U A L W W W . V I N O T E M P .
W W W . V I N O T E M P .
TABLE OF CONTENTS BEFORE USING .............................................................4 IMPORTANT SAFETY INSTRUCTIONS ................................4 ICE MAKER DIAGRAMS...................................................5 PROCEDURES & MAINTENANCE .......................................6 GETTING STARTED ....................................................6 CONNECTING YOUR ICE MAKER ...................................6 CLEANING AND MAINTAINING YOUR ICE MAKER............6 OPERATING YOUR ICE MAKER ......
BEFORE USING • • • Before connecting the appliance to a power supply, let unit stand upright overnight. This will reduce the possibility of the cooling system malfunctioning due to improper handling during shipping. Clean your unit thoroughly before putting into use. Use the parts diagram on page 5 to insure proper positioning of internal components.
ICE MAKER DIAGRAMS 17621 South Susana Road, Rancho Dominguez, California 90221 info@vinotemp.
PROCEDURES & MAINTENANCE GETTING STARTED 1. Remove the exterior and interior packaging. Check that ice basket and ice scoop are included. If any parts are missing, please contact the vendor. 2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean it. 3. Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e., stove, furnace, radiator). Place the ice maker on a level surface.
OPERATING YOUR ICE MAKER 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Select the size of the ice cube by pressing the “HAND” button. If the room temperature is lower than 60°F, it is best to select the small or medium ice size, otherwise the ice cubes might stick together. Open the cover, remove the ice basket and pour water into tank. Keep water level below the “Fill Line.” Press “START” on the control panel to begin the ice making cycle.
PROBLEMS WITH YOUR ICE MAKER You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestion below to see if you can solve the problem before contacting Vinotemp at info@vinotemp.com. TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE Low water level. The “Add Water” indicator is on. The “Ice Full” indicator is on. The “Water” and “Ice” indicators are both flashing. The ice cubes stick together. The compressor makes a loud buzzing noise. The unit does nothing.
TECHNICAL SPECIFICATIONS Model No. VT-ICEMP25 Ice Making Capacity 26 lbs / day Ice Storage Capacity 1.8 lbs Power 110V~120V/60Hz Rated Current 3.5 A Power Input 150W Refrigerant R134a/3 oz Size (W x D x H) 12" x 15" x 15" CIRCUIT DIAGRAM 17621 South Susana Road, Rancho Dominguez, California 90221 info@vinotemp.
TERMS OF SALE AND WARRANTY Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agree to the following terms and conditions of the sale: Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect.
17621 South Susana Road, Rancho Dominguez, California 90221 info@vinotemp.
SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING: Please do not place the unit within reach of children. For adult use only. Contact info@vinotemp.com with any questions or visit: www.vinotemp.com 17631 S.
