Owner's Manual

11
17621 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
Bottom Hinge 2
STORING WINE
While bottles may vary in size and dimension, you can store approximately 58 standard Bordeaux 750
ml bottles in this wine cooler. Please note that bottle capacities are approximate maximums when
storing traditional Bordeaux 750 ML bottles and include bulk storage.
REVERSAL OF DOOR SWING
This wine cooler is built with a reversible door hinge. You have the choice of opening it from either the
left or the right side. In order to reverse the direction in which your door opens, please follow these
simple instructions.
CAUTION: To avoid personal injury to yourself and/or property, we recommend that someone
assist you during the door reversal process.
IMPORTANT: Empty the wine cooler and secure any loose parts (shelves) before reversing the
door.
1. Remove bottom hinge 1 and place it inside the
accessory bag for later use
2. Remove the door support and place it inside the
accessory bag for later use
3. Remove the door and set it aside for later use
4. Remove top hinge 1 and place it inside the accessory
bag for later use
5. Remove the hinge cover on the top left-hand side of
the cabinet and install it on the top right-hand side of
the cabinet
6. Take out top hinge 2 from the accessory bag and
install it on the top left-hand side of the cabinet
7. Remove the door handle from the left-side of the door
frame and install on the right-side
8. Install the door
9. Take out bottom hinge 2 from the accessory bag and
install it on the bottom left-hand side of the cabinet
10. Install door support on the bottom right-hand side of
the cabinet
Note:
1. It is recommended that you change the door swing before installation.
2. In order to allow the coolant to settle inside the compressor, you must refrain from plugging in
the unit for 24 hours after the cabinet has been out of an upright position.
Door support
Top hinge 2
Top hinge 1
Bottom hinge 1