A PROUD HERITAGE OF EXPERIENCE & QUALITY BEVERAGE COOLER VT-BC34 TS O W N E R ’ S M A N U A L W W W . V I N O T E M P .
General Operating Instructions Remove all external and internal packaging from your beverage cooler. Be sure that all parts have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date. Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. • • • Let the unit rest UNPLUGGED for 24 hours once you have it placed in your home.
Table of Contents PARTS AND SPECIFICATIONS ............................................................ 6 IMPORTANT SAFETY INSTRUCTIONS .................................................. 4 BEVERAGE COOLER INSTALLATION .................................................... 7 OPERATING INSTRUCTIONS.............................................................. 7 TEMPERATURE CONTROL .................................................................. 7 INSTALLING AND REMOVING SHELVES ...............................
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock or injury when using your appliance, follow these basic precautions: • • • • • • • • • • • • • • • Use this appliance only as described in this manual. Other uses are not recommended and may cause fire, electric shock or injury. This product is intended for indoor, household use. To protect against electric shock, do not immerse unit, plug or cord in water or other liquids. Avoid locating the unit in moist areas.
ELECTRICAL CONNECTION Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, frayed or shows cracks or abrasions across its length, have it replaced at an authorized service center. For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong groundingtype plug, and should be used in combination with a properly connected grounding-type outlet.
PARTS AND SPECIFICATIONS 1. 2. 3. 4. 5. 6. Control Panel Hinge Cover Light Standard Shelf Recessed Handle Foot Type Item Number Dimension (HxWxD) Weight Power Consumption Cooling System Ambient Temp. Range Temperature Range Rated Voltage Rated Frequency Input Power 1 Temp. VT-BC34 TS 32.75"×19"×18.5" 59 Lbs 0.0858 kW.h/24h R134a 60-90°F 34-43°F 120V 60Hz 85W *Note: This beverage cooler is designed to store up to 80 12 oz cans.
BEVERAGE COOLER INSTALLATION • • • • • • • • • • • • Remove the exterior and interior packaging before use. Check to be sure you have all of the parts and 1 owner’s manual. Place your beverage cooler on a flat, dry surface that is strong enough to support the unit when fully loaded. This unit is designed for free standing installation only. Do not place heavy objects on top of the unit.
Noted: Control Panel Lock 1. Your beverage cooler is equipped with an AUTOMATIC control panel lock function. This function will prevent any unwanted changes to your temperature or power settings. 2. The lock function will activate automatically 12 seconds after the last time a button is pushed on the control panel will beep and blink that indicates the control panel is active and the settings can be changed.
CLEANING AND CARE • • • • • • Always unplug the beverage cooler before cleaning. Do not use benzene, scrubbing brushes or chemical cleaners as these will damage the unit. Use only a mild, nonabrasive cleanser to clean the exterior of the cabinet. Clean the stainless steel door and handle by wiping with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. Wash the racks with a mild detergent solution.
TROUBLESHOOTING You can solve many common beverage cooler problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before contacting Vinotemp at info@vinotemp.com. SYMPTOM Door will not close properly. Unit does not operate—does not have power Power is ON but the unit will not cool. POSSIBLE CAUSE • • • • • • • The beverage cooler is not level. The shelves are out of position. The door was reversed and not properly installed.
TERMS OF SALE AND WARRANTY Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agree to the following terms and conditions of the sale: Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect.
SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING: Please do not place the unit within reach of children. For adult use only. Contact info@vinotemp.com with any questions or visit: www.vinotemp.com 17621 S.
