A PROUD HERITAGE OF EXPERIENCE & QUALITY 4 Bottle Wine Dispenser Dispenser & Preserver VT-WINEDISP4SS O W N E R ’ S M A N U A L W W W . V I N O T E M P .
W W W . V I N O T E M P .
General Operating Instructions Remove all external and internal packaging from your wine dispenser. Be sure that all parts have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date. Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. Let the unit rest, UNPLUGGED for 24 hours once you have it placed in your home.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .............................................. 5 ELECTRICAL CONNECTION............................................................ 6 PARTS AND SPECIFICATIONS........................................................ 7 INSTALLATION INSTRUCTIONS ..................................................... 8 OPERATING YOUR WINE DISPENSER ............................................. 8 CARE AND MAINTENANCE............................................................
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: Read and follow all instructions before use. Do not operate this or any other appliance with a damaged cord. Always unplug the appliance before performing any care or maintenance. Exercise caution and use reasonable supervision when appliance is used near children. Never allow children to operate, play with or crawl inside the appliance.
ELECTRICAL CONNECTION Electrical Cord We strongly recommend against the use of an extension cord. However, if you still elect to use an extension cord, it is necessary that it be a properly rated UL-listed, 3-wire grounding type appliance extension cord with a 3-blade grounding plug and a 3-slot receptacle. 6 W W W . V I N O T E M P .
PARTS AND SPECIFICATIONS This refrigerated wine dispenser displays, stores, and dispenses 4 opened wine bottles, keeping them fresh from oxidation for up to 45 days. Wines can be maintained at a chosen storage and serving temperature between 45˚F and 65˚F. NSF-approved plastic components, sanitary stainless steel spouts, and electronic valves keep wines clean and prevent any drips from spouts. Easily dispense the perfect glass of wine at any time with just the touch of a button. Model No.
INSTALLATION INSTRUCTIONS Before Using Your Unit Remove all packing material before using your wine dispenser. Check to be sure the appliance is in good condition. Use a soft, dry cloth to wipe down the outside of the wine dispenser thoroughly. Before connecting your wine dispenser to the power source, let the unit stand upright for 24 hours.
Attaching and Removing Wine Bottles 1. 2. 3. 4. 5. 6. Unscrew lower part of bottle fix nut and place it on the neck of desired wine bottle. Slide bottle upward, with gas and wine tube inside the bottle. Fit bottle mouth into silicon plug. If bottle mouth is larger, lift upper part of bottle fix nut to free silicon plug completely and ease bottle mouth into the silicon plug first. Tighten lower part of bottle fix nut to the upper part.
Setting the Temperature The temperature display will show the current temperature inside the unit. To set a temperature, press and hold the button till the display shows “H1” and the displayed temperature starts to flash. Once the temperature display starts to flash, use the or buttons to select your desired temperature. For wine to stay fresh up to 45 days, bottles must be closed and unit preservation system must be properly sealed to prevent deterioration. Keep wine at proper temperature in unit.
CIRCUIT DIAGRAM 17621 South Susana Road, Rancho Dominguez, California 90221 info@vinotemp.
PROBLEMS WITH YOUR WINE DISPENSER Most common problems can be solved easily, saving you the cost of a possible service call. Try the suggestions below to solve the problem before contacting Vinotemp at info@vinotemp.com. TROUBLESHOOTING Dispensing System Complaint Possible Causes One canister only dispensing 1 or 2 bottles, gas leaking/escaping Unit not dispensing Dispensing interrupted or slow g. Bottle not tightened a. Argon/Nitrogen leak g. a. b. Defective pressure regulator b. c.
Dispensing System Complaint Possible Causes Wine dripping a. Solenoid valve seat leak b. Spout loose a. Wine tube leak b. Spout loose c. Empty bottle Wine divided Too many bubbles Cooling system Complaint Unit not running a. Debris in spout a. Argon/Nitrogen pressure is too high Temperature is too high Temperature is too low Compressor running but not cooling a. Check the wine tube b. Push the spout to tighten c. Change the empty bottle out for a full bottle a. Clean out debris a.
TERMS OF SALE AND WARRANTY Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agree to the following terms and conditions of the sale: Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect.
17621 South Susana Road, Rancho Dominguez, California 90221 info@vinotemp.
SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING Please do not place the unit within reach of children. For adult use only. Contact info@vinotemp.com with any questions or visit: www.vinotemp.com 17621 S.