Owner's Manual

OPERATING YOUR WINE COOLER

CONTROLS

POWER

To turn the appliance ON or OFF, touch the

button for 5 seconds.

LIGHT

To turn on the internal LED lighting, touch the

button on the left and/or right side.

Used to raise (warm) the set temperature by 1°C or 1ºF.

DOWN

Used to lower (cool) the set temperature by 1°C or 1ºF.

ºF/ºC Selector

Select the temperature display setting in Fahrenheit or Celsius degree.

KEY LOCK

If 2 minutes pass without any keys being selected, the controls will lock automatically. To release the

lock, touch the

and marks at the same time for at least 5 seconds.

TEMPERATURE ZONES

The wine cooler has two temperature zones with a temperature range of 40°-72°F. The recommended

temperature setting for each zone is:

• Lower Zone between 40°-72°F

• Upper Zone between 40°72°F

NOTE: The temperature set for the Lower Zone must always be the same or higher than the

temperature set for the Upper Zone. For optimal performance, the set temperature of the two

zones should differ by at least 4°F.

SETTING A TEMPERATURE

• The temperature will increase by 1°C or 1ºF if you touch UP once, or the temperature will

decrease by 1°C or 1ºF if you touch DOWN

once.

• To view the set temperature in either zone at any time, touch UP

or DOWN and the set

temperature will temporarily flash in the LED display for 5 seconds.

NOTE: When using the unit for the first time or after a long period of inactivity, there may be a

variance of a few degrees between the selected temperature and the temperature indicated on the

LED readout. This is normal due to the length of inactivity, and will correct itself after the unit runs for

a few hours. If the unit is unplugged, has lost power or is turned off, wait 3 to 5 minutes before

restarting the unit. The unit will not restart before this time delay.