Owner`s manual

Abox in detail
10
10 Technical specification
Connections
Input:
•CH1:JACKpassivechannel;1/4”Dia.StandardMonoJack
•CH2:XLRbalancedphantompower+48V;
Output:
•AMPOUT(MixofCH1&CH2):JACKunbalancedconnection;maximum9V
RMS@470Ohms;1/4”Dia.StandardMonoJack
•PA-OUT(MixofCH1&CH2):XLRbalancedconnection;maximum9VRMS
@100Ohms
Electrical characteristics:
CH1-Channel1(passivechannel)
•Impedance5Meg.Signallevelupto0dBu;
•AdjustableChannel1level
•ParametricequalizerofChannel1:Frequencyrange360Hz-4KHz
•MIDlevelcorrection:+/-12dB.
CH2-Channel2(activechannel,+48VPhantomPower)
•Impedance2K.SignalleveluptoCH2is-20dBu;
•ParametricequalizerofChannel2:Frequencyrange100Hz-1.8KHz;
•MIDlevelcorrection:+/-12dB;
•Notchlter:attenuation17dB.Tuningrange50-250Hz;
•Lowpassshelvinglterintherange1KHz-20KHzwithattenuationof6dB.
Tonecontrols(mixofCH1&CH2)
•Low:+/–12dBShelf@40Hz
•Low:+/–12dBBell@700Hz
•High:+/–12dBShelf@3KHz
Power IN
•110Vor230Vselectable.
•Consumptionlessthe5W
Phantom power on XLR CH2
•+48V
Size
•11x22x5WxLxHcm[4.3x8.6x1.9inches]
Weight
•920gr.[2.02pound]