Owner`s manual

Abox in detail
6
6 Channel 1 (CH1)
TheCH1isahighinputimpedancechanneldesignedforpassivetransducer
(eg.piezoormagneticpickup)anditcanhandleupto0dBuwithoutdistor-
tion.UseamonojackfromtheleftsideinproximityoftheCH1toconnectto
yourpickup.
Ifyouareproperlyconnected,yoursoundwillbemonitoredviatheCH1lamp.
6.1 Parametric equalizer (CH1)
TheCH1isequippedwithaparametricequalizerdesignedtocontrolthe
midsofyourpassivepickup.Itoperatesbetween360Hzto4KHzbycorrecting
within+/-12dB.
Ifyouuseapiezotransducer,byattenuatingatleast6dBthefrequency
around2.5KHz,youwillreducethemetallic-nasalresponcerenderingthe
soundmuchmorenatural.
6.2 Level control (CH1)
TheLEVELknobcontrolstheoutputsignaloftheCH1.Ifyouaretuningthe
CH1’sequalizerorifyoudonnotintendtouseCH2keeptheLEVELofCH2to
minimum.
7 Channel 2 (CH2)
TheCH2hasalowbalancedinputimpendacedesignedforconnectingto
eitheractiveorpassivemicrophoneviaanXLRbalancedcable.
Ifyouarecorrectlyconnectedtoyourmic,theCH2’slightwillmonitoryour
micsignalstrength.
7.1 Parametric equalizer (CH2)
Thechannel1isalsoequippedwithparametricequalizerdesignedtocontrol
thelow/lowmidsofyourmic.Itoperatesbetween100Hzto1.8KHzbycorrect-
ingwithin+/-12dB.