Installation

Instructions
Step 3: Plot the Wall
Use the printed template to mark the mounting holes on
the wall. If installing multiple boards, we recommend
1/8” spacing between each board (guides are provid-
ed on the template). Using a level, ensure the printed
template is level along the top edge and mark the hole
locations by piercing the template with a sharp pencil or
a screw at the center of the 3 hole locations.
Step 4: Install the Wall Anchors
Drill a 5/32 inch (4mm) pilot hole at each mark to deter-
mine whether to use provided drywall spiral anchors or
the wood screws.
For drywall mounting, use a Phillips head screw driver
to screw the Spiral Drywall Anchors into the wall at the
marked hole locations until the head of the anchor is ush
with the wall surface. Insert the screw using a Phillips
head screw driver until approximately 3/8” of the screw
remains sticking out of the anchor.
If hole location is over a wood stud, use the wood screw
only, inserting the screw using a Phillips head screw driv-
er until approximately 3/8” of the screw remains sticking
out of the wall.
Step 5: Hang the Board
Place the board against the wall with the keyhole hang-
ers lined up just above the screw heads sticking out of
the wall. Slowly slide the board against the wall until the
screw heads fall into the keyholes. Then pull rmly down
until the screw heads make a popping sound into the top
portion of the keyhole hanger.
Step 6: Repeat & Add Wine
Repeat with other boards and interchange colors and
styles as many times as you’d like. Display your favorite
bottles.
metal | wood infused collection
by VintageView
GRAIN
ROD
Plotting Guide
*We recommend a minimum of 1/8”
spacing between boards
Add a Board Below
Measure:
12 5/8“ + perferred
spacing* from marks
1 & 2 on each board
12 5/8” + perferred
spacing* from mark 3
on each board
Add a Board
to the Left
Measure:
5 1/8” +
perferred
spacing* from
mark 1 to mark
2 on the left
board
12 11/16“+
perferred
spacing* from
mark 3 on each
board
Add a Board to
the Right
Measure:
5 1/8” +
perferred
spacing* from
mark 2 to mark
1 on the right
board
12 11/16“ +
perferred
spacing*
from mark 3
on each board
Add a Board Above
Measure:
12 5/8“ + perferred
spacing* from marks
1 & 2 on each board
12 5/8” + perferred
spacing* from mark
3 on each board
1
2
3