Complete Owner's Guide

17
Storage Features
Shelf Types
Display (top) Shelf
• Shipped flat inside cabinet
• Angled on top two liner ribs for bottle display
Fixed Shelf (Two Types)
• Full Width
– Sits below Display Shelf and
below telescopic shelves
– Fixed to liner rib with screws at the rear
• ¾ Width
– Sits below all other shelves
– Fixed to liner rib with screws at the rear
Telescopic Shelves
• Full width
• Fully extend on rails
• Fixed to liner ribs with plastic
removable clips
Shelf Removal
The top (or display) shelf can be removed
from the product.
To remove the top display:
1. Open door to at least 145°.
2. Remove all wine bottles from the shelf.
3. Lift shelf up off of the four clips and
pull straight out.
NOTE
It is VERY IMPORTANT to use pre-
existing screw holes; attempting to
make new ones could jeopardize the
strength of the rails and risk failure.
The telescopic shelves can be removed,
but maximum shelf capacity cannot
exceed 44 lbs.
To remove the telescoping shelves:
1. Open door to at least 145°.
2. Remove all wine bottles from the shelf.
3. Fully extend shelf.
4. Using a Phillips head screwdriver,
remove the 4 rail clip screws (2 per
rail).
5. Shelf and rails should slide out
together.
To reattach shelves, insert rail clip screws
into pre-existing holes on the rail supports.
x4