User Manual

OPERATION
INTERNAL LIGHT
In order to reduce energy consumpon, this wine
cabinet will automacally switch off the LED lights
aer 10 minutes.
If you want the LED light to remain on connuously,
this is possible. Please press and hold the LIGHT
buon for 5 seconds, the display will show LP. Aer
4 seconds the display will revert back to normal and
the light will remain on unl manually switched off.
If you want to revert back and conserve energy
(recommended), please press and hold the LIGHT
buon for 5 second, the display will show LF, aer
4 seconds the display will revert back to normal, and
the light will automacally switch off aer 10 minutes.
To modify the pre-set temperature of VWS035 models
Adjust the desired cooling temperature by pressing the
UP or DOWN buons. Each depression of the buons
will scroll through the available temperature sengs
in increase or decrease of 1 degree Celsius.
DISPLAY
To shows the temperature of the internal cabinet.
TEMP.SET
To shows the seng temperature.
You can set the temperature as you desire by pushing
the UP or DOWN buon. When you push the two
buons for the first me, the LED readout will show the
original temperature set at previous me.
The temperature seng can be adjusted from
6℃to 18℃
Control panel of VWS048SCA-X models
To modify the pre-set temperature of VWS048SCA-X
models Adjust the desired cooling temperature by
pressing the UP or DOWN buons. Each depression
of the buons will scroll through the available
temperature .
sengs in increments or decrease of 1 degree Celsius.
The temperature seng can be adjusted from 5℃ to
18℃.
To view the set temperature, press and hold the
UP or DOWN buons, the set temperature will
temporarily flash in the LED display for 5 seconds.
Aer 5 seconds the temperature will return to display
the actual temperature.
It is important to understand that there is a difference
between the air temperature inside the Wine Cellar
and the actual temperature of the wine: You will need
to wait approximately 12 hours before nocing the
effects of temperature
adjustment due to the crical
mass within a full Wine Cellar . Once the temperature
is set, it is strongly advised not to toy with it or adjust
frequently. The thermostat will maintain the
temperature inside the Wine Cellar within
a +/- 2.5 ℃ range.
But the thermal inera of the wine and the glass is
such that within this temperature range, the actual
temperature of the wine will only fluctuate
0.5℃ to 1℃.
Control panel of VWS035SCA-X / VWS035SBA-X/
VWS035SSA-X / VWS035TBA-X:
WINE SERVING TEMPERATURE CHART
All wines mature at the same temperature, which is a
constant temperature set between 12℃ to 14℃.
The below chart is an indicave temperature chart to
indicate the best temperature for drinking purposes.
Champagne NV, Sparkling, Spumante, 6℃
Dry White Semillon, Sauvignon Blanc, 8℃
Champagne Vintage, 10℃
Dry White Chardonnay, 10℃
Dry White Gewürztraminer, Riesling, Pinot grigio, 10℃
Sweet White Sauternes, Barsac, Montbazillac, Ice
Wine, Late Harvest , 10℃
Beaujolais, 13℃
Sweet White Vintage: Sauternes, 14℃
White Vintage Chardonnay , 14℃
Red Pinot Noir, 16℃
Red Grenache, Syrah , 16℃
Red Vintage Pinot Noir, 18℃
Cabernet & Merlot: French, Australian, New Zealand,
20℃
Chilean, Italian, Spanish, Californian, Argennean,
Vintage Bordeaux . 20℃
IMPORTANT INFORMATION ABOUT TEMPERATURE
Your VINTEC Wine Cellar and has been designed to
guarantee opmum condions for storing and/or
serving your wines.
Fine wines require long and gentle developments and
need specific condions in which to reach their full
poenal.
All wines mature at the same temperature, which is a
constant temperature set between 12
℃ to 14℃. Only
the temperature of dégustaon (wine appreciaon)
varies according to the type of wines (see Wine Serving
7
User Manual