HS-102P Pan and Tilt Head AM-HS-102P AM-HS-102PE AM-HS-102-IT AM-HS-102-ITE Operators Guide V3956-4980/1
HS-102P, PE, IT, ITE Pan & Tilt Head
Publication Part No. V3956-4980 Issue 1 July 2010 Published by Vitec Group Videocom Division Technical Publications Department William Vinten Building Western Way Bury St Edmunds Suffolk IP33 3TB UK Email: technical.publications@vitecgroup.com Copyright © Vitec Group plc 2010 All rights reserved throughout the world.
Operators guide Safety - read this first Understanding these instructions English The original instructions presented in this operators guide were written in English, and subsequently translated into other languages. If you are unable to understand these instructions, contact Vinten or your distributor to obtain a translation of the original instructions (EU Countries).
HS-102P pan and tilt head Latviešu Šajā operatora rokasgrāmatā iekļautie norādījumi sākotnēji tika sarakstīti angļu valodā un pēc tam pārtulkoti citās valodās. Ja nesaprotat šos norādījumus svešvalodā, sazinieties ar Vinten vai tirgotāju, lai saņemtu norādījumu tulkojumu (kādā no ES dalībvalstu valodām). Português Română Lietuvių Instrucţiunile originale prezentate în acest ghid pentru operatori au fost scrise în limba engleză, şi traduse ulterior în alte limbi.
Operators guide Water, moisture and dust Safety Instructions Protect the product from water, moisture and dust. The presence of electricity near water can be dangerous. Do not use the product near water and take care that liquids are not spilled onto the equipment. Please read this Operators Guide carefully before attempting to operate the product. Retain this guide for future reference.
HS-102P pan and tilt head Warning symbols ! WARNING! Where there is a risk of personal injury or injury to others, comments appear supported by the warning triangle symbol. Where there is a risk of damage to the product, associated equipment, process or surroundings, comments appear supported by the word ‘caution’. ELECTRIC SHOCK Where there is a risk of electric shock, comments appear supported by the hazardous voltage warning triangle symbol.
Operators guide Declaration of Conformity In respect of the following equipment manufactured by Camera Dynamics Ltd: Model Part Numbers: AM-HS-102P, AM-HS-102PE, AM-HS-102-IT are manufactured in accordance with: 89/336/EEC - The Electromagnetic Compatibility Directive By application of the following Harmonised Standards: EN55103-1:1996 Electromagnetic compatibility - Part 1 - Emission - Product family standard for audio, video, audio visual and entertainment and lighting control apparatus for professiona
HS-102P pan and tilt head Technical data Maximum payload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 kg (35.3 lbs) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.7 kg (17 lbs) Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 mm (8.9 in.) Width (including cradle) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operators guide Contents Page Safety - read this first. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HS-102P pan and tilt head Components [1] [2] [3] [4] [5] [6] [8] [7] Fig. 1 HS-102P pan and tilt head (left-hand-side) [1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Camera cradle [2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Camera cradle screws [3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operators guide [9] [10] [11] Fig. 2 HS-102P pan and tilt head (left-hand underside) [9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Main cover [10] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cover plate [11] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HS-102P pan and tilt head [12] [13] Fig. 3 HS-102PE weatherproof connectors [12] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lens control connector [13] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operators guide [14] [15] [16] Fig. 4 HS-102P-IT virtual studio head with Image Tracker [14] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Image Tracker [15] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Image Tracker cover plate [16] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HS-102P pan and tilt head Introduction and description The HS-102P is a small profile versatile remote pan and tilt head that can be wall mounted, hung from a ceiling bracket or mounted on to a pedestal or tripod. The head is designed to support a wide range of camera and lens combinations, weighing up to 16 kg (35 lbs).
Operators guide Applications The head is typically installed as part of a robotic system and can be remotely controlled by the Vinten Radamec Control System (VRC), Legislative Control System (LCS) or the MultiController II. Refer to the appropriate user guide or operating instructions provided with the control system for information on operating the head remotely. VRC and LCS installations The VRC system and LCS can control multiple HS-102P heads.
HS-102P pan and tilt head Multicontroller II The Multicontroller II can control up to six HS-102P heads. A typical system includes the controller with joystick control panel, head power supply, EPI interface and remotely operated heads (Fig. 6). Each head has its own dedicated power supply that provides power to the head and data connection between the head and controller. HS-102P Data cable AM-DD-CAB-XXX HS-102PE HS-102P Multicontroller II (up to 6 heads) Fig.
Operators guide Installation Mounting the head The head can be mounted onto a tripod or pedestal, post, wall bracket or ceiling mount. CAUTION! The installation of the head must be performed by competent and trained personnel. Attach the head to its mount using the six screws provided and tighten securely. To ensure a secure mounting, the screws must protrude at least 5/16” (8mm) into the mounting plate [11] at the base of the head.
HS-102P pan and tilt head [17] [18] Fig. 7 Wall bracket (AM-WBKT-102) [17] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HS-102P mounting holes (6) [18] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operators guide [19] [20] Fig. 8 HS-102P ceiling mount [19] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HS-102P mounting holes (6 off) [20] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HS-102P pan and tilt head Electrical Connections Power supply connection The head is powered by either a rack mounted power supply (AM-PS27-5R) or a modular power supply (AM-PS30-2). A combined power/data floor cable (AM-SP-CAB-XXX) connects between the power supply and the Power/data connector on the head. The floor cable supplies the head with power and data communications (to/from) the controller.
Operators guide NLD Interface HS-102P Power/Data floor cable AM-SP-CAB-XXX NLD adaptor cable V3990-5005 PSU AM-PS27-5R or AM-PS30-2 Fig. 9 NLD Connection NLD connection The NLD interface is usually attached with heavy duty velcro to the main cover or to another convenient location on the head. For installation and configuration of the NLD, refer to the Operator Guide for the Native Lens Drive (Publication part no. V3977-4980). HS-102PE with NLD The NLD interface is not weatherproof.
HS-102P pan and tilt head Mounting and balancing the payload For proper operation it is very important that the load is properly balanced mechanically with the centre of gravity (C of G) set exactly on the tilt axis. 1. Start with the camera cradle level. 2. Position the camera on the camera cradle and attach using bolts through the camera cradle into the base of the camera. Leave the bolts just loose enough to be able to slide the camera backwards and forwards. 3.
Operators guide Configuration Range limits The factory default settings for the head clip (range limit) parameters for pan, tilt, zoom and focus are stored in non-volatile memory in the head. If the range limits require adjustment, contact Vinten Radamec or advise on setting the range limits. Pan/Tilt direction When the head is ceiling mounted, the pan and/or tilt senses can be reversed. Contact Vinten Radamec for advise on changing the pan and tilt senses.
HS-102P pan and tilt head Operation The head has no external switches or controls. The head is operated remotely from the controller using the joystick control panel or controller software. Always refer to the operating instructions supplied with the controller for information on panning and tilting the head, and operating the camera lens zoom and focus. Joystick control When the head is operated using the control joystick panel (Fig. 10): Push the joystick left and right to pan the head.
Operators guide Panning the head Tilting the camera cradle on the head Zooming the camera lens Fig.
HS-102P pan and tilt head Maintenance Routine maintenance The head is a highly reliable and stable product that requires minimal routine maintenance. Apart from checking balance and overall operation periodically, the head requires no other routine maintenance. Checking balance It is recommended that balance is checked at least once a month to ensure proper operation and to reduce excessive wear on the drive train and potential overheating.
Operators guide [21] [22] Fig. 11 Desiccant housing [21] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Desiccant housing [22] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HS-102P pan and tilt head Parts list Main Assemblies HS-102P pan & tilt head (Studio version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AM-HS-102P HS-102PE pan & tilt head (Environmental version) . . . . . . . . . . . . . . . . . . . . . AM-HS-102PE HS-102P-IT pan & tilt head (Studio version with VR output) . . . . . . . . . . . . . . AM-HS-102-IT HS-102P-ITE pan & tilt head (Environmental version with VR output). . . . . . AM-HS-102-ITE Power Supplies Power supply (modular) . . . . . . .
HS-102P Pan and Tilt Head Operators Guide V3956-4980/1 CHINA The Vitec Group plc China Rm 706, Tower B Derun Building YongAn Dongli A No. 8 Jianwai Ave, Chaoyang District Beijing, China 100022 Tel. +86 10 8528 8748 Fax. +86 10 8528 8749 FRANCE Vitec Group Videocom Division 171 Avenue des Grésillons 92635 GENNEVILLIERS Cedex France Tel. +33 820 821 336 Fax. +33 825 826 181 GERMANY Vitec Group Videocom Division Gebäude 16 Planiger Straße 34 55543 Bad Kreuznach Germany Tel. +49 671/483 43 30 Fax.
