HS-105P Pan and Tilt Head AM-HS-105P AM-HS-105PE AM-HS-105PESA AM-HS-105PSA AM-HS-105IT AM-HS-105ITE V4058-0001 V3995-0001 V4027-0001 Operators Guide V4058-4980/1
AutoCam™ HS105P series pan and tilt heads Operators Guide
Publication Part No. V4058-4980 Issue 1 September 2010 Published by Vitec Group Videocom Division Technical Publications Department William Vinten Building Western Way Bury St Edmunds Suffolk IP33 3TB UK Email: technical.publications@vitecgroup.com Copyright © Vitec Group plc 2010 All rights reserved throughout the world.
Operators guide Safety - read this first Understanding these instructions Eesti Käesoleva kasutajajuhendi algtekst on koostatud inglise keeles ning seejärel tõlgitud teistesse keeltesse. Kui juhend osutub teie jaoks arusaamatuks, võtke juhendi emakeelse tõlke hankimiseks ühendust Vinteni või kohaliku esindajaga (Euroopa Liidu riigid). English The original instructions presented in this operators guide were written in English, and subsequently translated into other languages.
HS-105P pan and tilt head Latviešu Português As instruções originais apresentadas no guia do operador foram escritas em Inglês e traduzidas para outros idiomas. Se não conseguir compreender estas instruções contacte a Vinten ou o seu distribuidor para obter a tradução das instruções originais (Países da UE). Šajā operatora rokasgrāmatā iekļautie norādījumi sākotnēji tika sarakstīti angļu valodā un pēc tam pārtulkoti citās valodās.
Operators guide Safety Guidelines Servicing This product is designed and manufactured to meet strict quality and safety standards. However, it is important that you are aware of the following operating precautions. Many of these instructions are commonsense precautions, but for your own safety and to ensure that you do not damage the equipment, we recommend that you read them. Do not attempt to service this product. Opening and removing covers may expose you to dangerous voltages or other hazards.
HS-105P pan and tilt head Warning symbols ! WARNING! Where there is a risk of personal injury or injury to others, comments appear supported by the warning triangle symbol. Where there is a risk of damage to the product, associated equipment, process or surroundings, comments appear supported by the word ‘caution’. ELECTRIC SHOCK Where there is a risk of electric shock, comments appear supported by the hazardous voltage warning triangle symbol.
Operators guide Safety when working with robotic equipment Safe working environment In normal operation, remote controlled heads and pedestals can move suddenly and without warning. Since audible warnings are not suitable for use within the studio environment, it is recommended that only trained personnel be allowed to work in the active areas where remote controlled heads and pedestals are located. Personnel should be made aware of the potential hazards of working in a robotic environment.
HS-105P pan and tilt head move unexpectedly at any time, and they must position themselves so that any motion would not cause them personal harm. When the robotic heads move, the speeds involved are fairly slow. However, the equipment is still capable of generating sufficient force to cause injury. Therefore, it essential that you exercise caution. In particular, be aware that the teleprompter is usually the fastest swinging element.
Operators guide Declaration of Conformity In respect of the following equipment manufactured by Camera Dynamics Ltd: Model Part Numbers: AM-HS-105IT, AM-HS-105PE, AM-HS-105-(, V3995-0001 are manufactured in accordance with: 89/336/EEC - The Electromagnetic Compatibility Directive By application of the following Harmonised Standards: EN55103-1:1996 Electromagnetic compatibility - Part 1 - Emission - Product family standard for audio, video, audio visual and entertainment and lighting control apparatus for
HS-105P pan and tilt head Technical Data Maximum payload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 kg (75 lb) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17.2 kg (38 lb) Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43.7 cm (17.2”) Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operators guide Contents Safety - read this first. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Introduction . . . .
HS-105P pan and tilt head Introduction The HS-105 pan/tilt head has been designed specifically for use with ENG size camera and lens configurations including a small teleprompter, with a maximum payload capacity of 34 kg (75 lbs). This compact and versatile head can be mounted within existing wall cavities or inverted for suspension from ceilings, and the camera platform is adjustable to provide perfect balance for your specific camera/lens combination.
Operators guide Components [1] [7] See Connection Panels for details of the [2] [3] [6] [4] [5] Fig 1 HS-105 pan/tilt head main body [1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Main cover [2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Platform fixing screws (2 off) [3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HS-105P pan and tilt head [8] [9] [11] [10] Fig 2 HS-105 pan/tilt head main cover [8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Main cover fixing screws (7 off) [9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cover plate (studio models only) [10] . . . . . . . . . . . . . . . . . . . . . . . Image Tracker Unit (option available on all HS-105 models) [11] . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operators guide [12] [13] Fig 3 HS-105 pan/tilt head underside [12] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Three-hole mounting plate [13] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HS-105P pan and tilt head External Connections All external connections are located on the side of the main body (Fig. 1). The type of external connector depends on the model of HS-105 pan/tilt head. [18] HS-105PE HS-105PENLD [14] [17] [15] [16] Fig 4 External connections on the HS-105PE and HS-105PENLD environmental pan/tilt heads [14] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Combined NLD & Servo lens drive connector [15] . . . . . . . . . . . . . . . . . . . . . . . . . .
Operators guide [19] [20] HS-105P Fig 5 External connections on the HS-105P studio pan/tilt head [19] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lens/control connector [20] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power/data connector [21] HS-105SPAWAR Fig 6 External connections on the HS-105SPAWAR pan/tilt head [21] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HS-105P pan and tilt head Typical installation The head is typically installed as part of a robotic system and can be remotely controlled by the Vinten Radamec Control System (VRC), Legislative Control System (LCS) or the Multi Controller II. Refer to the appropriate user guide or operating instructions provided with the control system for information on operating the head remotely.
Operators guide Electrical Connection Power supply and Controller connection The HS-105P pan/tilt studio head uses a combined power/data floor cable (AM-SP-CAB-XXX) that connects between the HS-105 rack mounted power supply unit (AM-PSD27-5R) and the Power/data connector ([16], [20], [21]) on the head as shown in Fig. 8. The floor cable supplies the HS-105P pan/tilt head with power and data communications (to/from) the Controller.
HS-105P pan and tilt head the HS-105P studio pan/tilt head using the supplied lens cable. A variety of lens cables are available to suit the servo lens drive supplied with your installation. Native lens drive The native lens drive is usually attached to an appropriate position on the HS-105P studio pan/ tilt head main cover [1]. A combined lens and power/data cable (V3990-5005) is used to connect between the power/data socket on the head [20] and the Power/data In socket on the native lens drive.
Operators guide NOTE: The Power/data connector on the native lens drive cable (V3980-5005) may need to be removed to allow the cable to be fed into the environmental housing. All installations should be performed by trained and competent engineers. HS-105PE-NLD V3977-0001 V3980-5035 Note: The native lens drive must be installed within an environmental housing with the camera and other accessories.
HS-105P pan and tilt head Operation Installing the head The HS-105 pan/tilt head can be mounted to a tripod, pedestal or mounted to a wall or ceiling using a mounting adapter. For installations where the HS-105 pan/tilt head is frequently moved from location to location, a wedge plate and adapter may be used to attach the head to its mount.
Operators guide Leave the camera fixing bolts just loose enough to be able to slide the camera backwards and forwards on the platform [6]. Mount the lens on the camera (if it was not already installed) and any other ancillary equipment such as tally lights, viewfinder, and so on. NOTE: Depending on the camera configuration, it may be necessary to use an intermediate plate to raise the C of G sufficiently to align with the tilt axis.
HS-105P pan and tilt head C of G height adjustment When the fore and aft balance has been achieved, align the payload C of G vertically to the tilt axis as follows: Warning! 1. Switch off the power to the head before making any adjustments to the head. 2. Risk of finger trap in moving parts. The total camera payload can reach 34 kg (75 lb). Take the necessary precautions to safely handle this weight before loosening the platform fixing screws [2]. 3.
Operators guide Maintenance General The HS-105 pan/tilt heads are robustly made to high engineering standards. Generally, aside from checking balance and overall operation periodically (once a week for example), the HS105 pan/tilt head should require no other routine maintenance. Routine Checks During use, check the following: Check the balance of the head and re-balance is necessary. Check the data communications with the controller. Check the overall operation of the head.
HS-105P pan and tilt head Parts list The following lists include main assemblies, user-replaceable spare parts and optional accessories. For further information regarding repair or spare parts, please contact Vinten Radamec or your local Vinten Radamec distributor. For information online, visit our website at: www.vintenradamec.com Main Assemblies HS-105P Head, P&T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AM-HS-105P HS-105PE Head P&T, Environmental. . . . .
HS-105P Pan and Tilt Head Operators Guide V4058-4980/1 CHINA The Vitec Group plc China Rm 706, Tower B Derun Building YongAn Dongli A No. 8 Jianwai Ave, Chaoyang District Beijing, China 100022 Tel. +86 10 8528 8748 Fax. +86 10 8528 8749 FRANCE Vitec Group Videocom Division 171 Avenue des Grésillons 92635 GENNEVILLIERS Cedex France Tel. +33 820 821 336 Fax. +33 825 826 181 GERMANY Vitec Group Videocom Division Gebäude 16 Planiger Straße 34 55543 Bad Kreuznach Germany Tel. +49 671/483 43 30 Fax.
