User Manual

15
Digital display
The digital display (15) comprises a two-row LCD display. It has three modes of operation, select-
ed by the buttons (14)(16). The display may be illuminated by pressing the illumination button (16).
Clock and stopwatch
The top row of the display is a 24-hour clock (15.1), which is always visible. This is the default
mode. The bottom row is a stopwatch, counting in seconds and minutes from 00:00 to 59:59.
To set the clock:
Press both buttons (14)(16) momentarily. The hours display will flash.
Use the timer button (14) to increment the hours.
Press the illumination button (16). The minutes display will flash.
Use the timer button (14) to increment the minutes.
Press the illumination button (16) to exit and start the clock.
To display, start, stop or clear the stopwatch:
Momentarily pressing the timer button (14) will display, start, stop or clear the stopwatch in
that sequence.
Balance
Balance mode is active any time the balance adjustment knob (8) is turned (unless the stopwatch
is running) and remains active for 15 seconds after adjustment has finished. In this mode the bot-
tom row shows the setting of the balance mechanism on a scale of 0.0 to 100.0 The BAL legend
(15.3) is also lit. The top row of the display shows the 24-hour clock.
Digital display
(16) (14)
(15.1) (15.2)
(15.3)