User Manual

20
Converting the base
Spares kits are available to convert the head from ball base to flat base versions and vice versa.
Kit 3805-900SP comprises a ball base, bowl clamp and fixing hardware; while kit 3805-901SP has
a flat base, mounting bolts and washers, a spanner and fixing hardware.
To change the base:
Remove the payload, then remove the head from its mounting.
On the base, remove eight screws (12.1) and separate the base (12) from the head.
Position the replacement base on the head and secure with eight screws (12.1), using Loc-
tite 222E.
Converting the base
(11)
(12.1)
(12)