Technical data

19
Battery replacement
The battery illuminates the level bubble (10) when the switch (13) is pressed. The level bubble
remains lit for approximately 15 seconds.
The battery should be replaced yearly or whenever the illumination is considered inadequate.
To replace the battery:
Tilt the head forwards to allow access to the battery cover (16) and apply the tilt brake (4).
Push down on the top of the battery cover (16) and pull forward.
Pull the battery (16.1) out of the battery compartment.
Push the replacement battery into the battery compartment, observing the correct polarity.
Refit the battery cover (16).
Press the switch (13) and ensure that the level bubble (10) is lit for approximately 15 sec-
onds.
Battery replacement
(16.1)
(16)
(4)