User Manual- Flowtech 75

Accessories

Fit Supplied Attachment Mount

1. There are three accessory docks. These can be used to dock the

supplied attachment mount, Variable Friction Arm etc..

2. Offer the accessory to the docking point on the tripod head.

3. Insert the screw and tighten clockwise using a 5mm Hex key,



4. Follow the same procedure to attach optional accessories to the

remaining mounting points if required.





Fit Optional Carry Strap

1. Fit the attachment mount as previous section: “Fit Supplied

Attachment Mount”.

2. Fit the split ring to the mounting point at the bottom of the upper

section.

3. Attach the strap clasps to the mounting points.