Instructions / Assembly

Quick Repair Kit - sm

Broken nailing fins? Small, unsightly cracks or holes? No problem. The Quick Repair Kit - sm by

VinylDoc is for making quick repairs on the nailing fins of vinyl window frames and patching small

holes. This kit includes both flexible soft stock material that can form to irregularities on corners and hard

stock for patching holes on nailing fins and vinyl window frames. Don’t replace when you can repair with

time-tested products from VinylDoc!

Applications:

* Repair cracked and broken nailing fins

* Address alarm sensor holes

* Fix small holes from screw holes and installation damage

* Weather damage caused by hail storms or debris from high winds

* Restore damaged or cracked window frames

Instructions:

1. Clean damaged area and dry thoroughly to assure proper adhesion.

2. For an overlay of the damage, cut PVC material 2” longer than damaged area. Overlap PVC

material 1” on each side of the break.

3. Remove cap and nozzle from the tube of Liquid PVC and discard the red ring.

a. Reattach the cap and nozzle. Tighten firmly to break seal on the aluminum tube.

b. Remove the red cap and gently squeeze tube to make sure the seal is broken and the

Liquid PVC flows freely. Snip the nozzle with a scissor if a larger bead is desired.

6. Apply “Liquid PVC” liberally to both the window frame and the PVC material.

7. Before adhesive skins over, clamp the PVC material to the window frame until weld holds.

Colder temperatures will take longer to set up.

8. Place a bead of “Liquid PVC” around all edges to ensure a weather tight seal.

9. Replace the cap to reseal the tube of Liquid PVC. Once opened, it will have a limited life.

a. On reuse, the nozzle will need to be cleaned with a paper clip or wire.

10. Tutorials on how to repair vinyl window frames can be viewed at www.vinyldoc.com.

Includes:

1/2 oz tube of Liquid PVC used to chemically weld repairs to nailing fins and frames

2 flexible flat soft stock material for repairing uneven surfaces on nailing fins

1 flexible corner soft stock material for repairing uneven surfaces on nailing fins

1 angled piece of hard window frame material for repairing damage

1 straight/flat window frame material for overlaying holes and damaged areas

PAGE 1
Quick Repair Kit - sm Broken nailing fins? Small, unsightly cracks or holes? No problem. The Quick Repair Kit - sm by VinylDoc is for making quick repairs on the nailing fins of vinyl window frames and patching small holes. This kit includes both flexible soft stock material that can form to irregularities on corners and hard stock for patching holes on nailing fins and vinyl window frames.
PAGE 2
Notice: With alarm sensor holes, screw/nail holes or any damage that has the potential for a water infiltration, an experienced technician may be required to repair both the interior of the wet cell on the window frame as well as the outer top layer. Disclaimer: VinylDoc is not liable for user workmanship, their ability to use this product or their ability to diagnose window frame issues.