Instructions / Assembly

Quick Repair Kit - XL

The Quick Repair Kit – XL by VinylDoc is used for fast repairs on broken vinyl window and patio slider

frames. Common issues include interlock breakage, hail damage, alarm sensor holes and installation

damage. This kit allows you to quickly repair and restore your vinyl window frame to industry standards.

Repair nailing fins, alarm sensor holes, screw holes and weather damage caused by hail storms or debris

from high winds with ease!

Applications:

* Repair damaged or cracked window frames, even nailing fins

* Patch broken interlocks on vents, or repair unsightly hail damage

* Address alarm sensor holes

* Fix small holes and cracks from screw holes and installation damage

Instructions:

1. Clean damaged area and dry thoroughly to assure proper adhesion.

2. For an overlay of the damage, cut PVC material 2” longer than damaged area. Overlap PVC

material 1” on each side of the break.

3. Remove cap and nozzle from the tube of Liquid PVC and discard the red ring.

a. Reattach the cap and nozzle. Tighten firmly to break seal on the aluminum tube.

b. Remove the red cap and gently squeeze tube to make sure the seal is broken and the

Liquid PVC flows freely. Snip the nozzle with a scissor if a larger bead is desired.

6. Apply “Liquid PVC” liberally to both the window frame and the PVC material.

7. Before adhesive skins over, clamp the PVC material to the window frame until weld holds.

Colder temperatures will take longer to set up.

8. Place a bead of “Liquid PVC” around all edges to ensure a weather tight seal.

9. Replace the cap to reseal the tube of Liquid PVC. Once opened, it will have a limited life.

a. On reuse, the nozzle will need to be cleaned with a paper clip or wire.

10. Tutorials on how to repair vinyl window frames can be viewed at www.vinyldoc.com.

Includes:

2 oz tube of Liquid PVC used to chemically weld repairs that will last

2 pieces angled window frame extrusion hard stock for replacing and repairing missing nailing fins

2 pieces flat window frame extrusion hard stock for overlays on vinyl frames and nailing fins

Notice: With alarm sensor holes, screw/nail holes or any damage that has the potential for a water

infiltration, an experienced technician may be required to repair both the interior of the wet cell on the

window frame as well as the outer top layer.

PAGE 1
Quick Repair Kit - XL The Quick Repair Kit – XL by VinylDoc is used for fast repairs on broken vinyl window and patio slider frames. Common issues include interlock breakage, hail damage, alarm sensor holes and installation damage. This kit allows you to quickly repair and restore your vinyl window frame to industry standards.
PAGE 2
Disclaimer: VinylDoc is not liable for user workmanship, their ability to use this product or their ability to diagnose window frame issues. In case of excessive damage to a window frame or if the window frame has water infiltration issues, an experienced vinyl technician must be called to diagnose the integrity of the window and/or the damage to the structure of the home.