Owner`s manual
Viola Cadenza Manual Rev 1 Page 14 of 16 7th September 2005
• Check that the Cadenza output level control and if applicable,
the signal source volume control, are set at a level that is loud
enough to hear.
3. The stereo image is off center.
• Check that the gain controls are set to the same position
4. Output is in mono.
• If you are using the balanced outputs, check that you have
connected to one output in the upper row and one output in the
lower row on the Cadenza rear panel. If both connections are
made to the same row you will be listening to a mono signal.
WARRANTY
VIOLA Audio Labs products are warranted to be free from defects if used under
normal conditions for a period of 5 years from the date of shipment from the
factory. This warranty is transferable to subsequent owners.
Repairs or modifications carried out by the factory, or by an authorized repair agent,
shall be guaranteed for the remaining portion of the warranty, or for 1 year, which
ever is greater.
Any unauthorized modifications or repairs will result in the warranty becoming void.
The warranty will also become void if VIOLA determines that the unit has been
subject to misuse.
There is no other express warranty on VIOLA products. This warranty shall not
extend beyond the stated warranty period. No responsibility is assumed for
incidental or consequential damage.
SERVICE
Customers Within the USA
In the first instance please contact your local VIOLA dealer. Should they be unable
to assist you, please contact VIOLA by phone on 1-203-772-0435, by fax on 1-203-
772-0569, or by email at service@Violalabs.com.
If it becomes necessary to return your unit to the factory, you will be given a Return
Authorization (RA) number. This number must be clearly marked on the outside of
the shipping box. Returns without a RA number will not be accepted. Returns
received in non-standard packing will be replaced with new packing at the owner's
expense. If you need new packing, please contact your VIOLA dealer or the factory.










