Owner`s manual

Viola Cadenza Manual Rev 1 Page 7 of 16 7th September 2005
CADENZA FRONT PANEL DESCRIPTION
Figure 2. Cadenza front panel
A. Input Selector Switch. The Cadenza has 7 inputs. These are
described in the table below:
Input Description Connector
1 Reserved for future use -
2 to 5 Unbalanced RCA
6 Balanced Fischer
7 Balanced XLR
B. Left Channel Gain Control. This allows the gain of the left channel
to be varied between 6dB and 16 dB in 1 dB steps.
C. Power Indicator LED. This glows green when the unit is switched
on.
D. Right Channel Gain Control. This allows the gain of the right
channel to be varied between 6dB and 16 dB in 1 dB steps.
The gain controls allow the unit to be used with input sources that
have a wide range of output levels. They may also be used together
to provide a balance adjustment.
E. Output Level Control. This is a precision stepped attenuator which
allows the output level of the unit to be varied over a 59dB range in
1 dB steps.
71
4
5
3
2
6
INPUT
6
7
8
9
10
11
12
13
14
15
16 6
7
8
9
10
11
12
13
14
15
16
-40
-20
-10
0
+10
-30
LEFT dB GAIN RIGHT dB GAIN
OUTPUT LEVEL
CADENZA
PREAMPLIFIER
V
IOLA
A B C D
E