Owner`s manual

Viola Cadenza Manual Rev 1 Page 8 of 16 7th September 2005
CADENZA REAR PANEL
Figure 3. Cadenza rear panel
The Cadenza’s input and output connectors are arranged in 2 rows on the rear panel.
The lower row is for the right channel and the upper row is for the left channel.
F. DC Power Input Connector.
G. RCA Unbalanced Tape Output. This output provides a buffered
fixed level version of the currently selected input and may be used
to drive a cassette, CD or other recording device.
H. RCA Unbalanced Output. Use this output if your power amplifier
only has unbalanced inputs.
I. Fischer Balanced Output. Use this output if you wish to use
balanced cables fitted with Fischer connectors.
J & K. XLR Balanced Output. Both sets of outputs provide identical
signals. Use either set if your power amplifier has balanced inputs
and you wish to use cables fitted with XLR connectors. The
provision of 2 sets of outputs makes the Cadenza easy to use in bi-
amped systems.
L. XLR Balanced Input. Use this input to connect balanced sources
using cables fitted with XLR type connectors.
M. Fischer Balanced Input. Use this input to connect balanced
sources using cables fitted with Fischer type connectors.
N to Q. RCA Unbalanced Inputs. Use these inputs to connect unbalanced
sources using cables fitted with RCA type connectors.
R. Optional Input. This is where any future optional input cards such
as a phono stage will be fitted.
R
L
INPUT 2
INPUT 3 INPUT 4 INPUT 5
INPUT 6 INPUT 7
OUTPUTS
DC POWER
TAPE
VIOLA AUDIO LABORATORIES
315 PECK STREET
NEW HAVEN, CT 06513
WWW.VIOLALABS.COM
F G H J I M L K N O P R Q