22” 1080p LCD Television LC22VF59
Contents Contents Caution Safety Information 2 3 Unit and Accessories Product Feature 4 4 Introduction 1. Front View 2. Rear View 3. Remote Control 5-8 5 6 7-8 Connection 9-11 Basic Operation 12-13 OSD Menu 1. Picture menu 2. Audio menu 3. Time menu 4. Setup menu 5. Lock menu 6.
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor • To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Unit and Accessories and Product Feature Unit and Accessories TV set User's manual Remote control Batteries: 2xAA Product Feature - Inputs: RF, VIDEO, VGA, YPbPr, HDMI - Audio Input: AV Audio R/L, PC Audio - Support TV mode: NTSC-M, ATSC - Search TV: Auto/Manual - Auto-shutting down - Program exchange and edit 4 Mains Cable
Introduction Introduction 1. Front View MENU CH- CH+ VOL- VOL+ TV/AV POWER Led Indicator Remote Control window (Keep clear) 1. (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off.
Introduction 2. Rear View 8 SWITCH 1 AC POWER IN HDMI VGA 2 3 PC Y audio in 4 Pb Pr VIDEO 5 L R Audio in 6 RF 7 AC POWER IN: Connect to an earth 100-240V,50-60Hz AC outlet with the Power Cable. HDMI: Connect it to the HDMI of DVD or other equipment. VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC. PC AUDIO: Connect it to the audio output terminal of PC. YPbPr: Connect them to the YPbPr video output terminal of DVD.
Introduction 3. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. TV/AV POWER(red button): Turn the TV on/standby. TV/AV: Press to display the input source menu. CC: Press to display the closed caption. MTS: Press to select the audio channels. FAV: Press to add or remove favorite channel. EPG: Press to enter the EPG menu directly.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones. 3. Close the cover. Batteries shall not be exposed to excessive heat such as sunshine or fire. - The remote control should be operated within 30 feet(7m) and 300 to the left and right of the IR receive at the front of the LCD TV.
Connection Connection Power Cord Connection - Connect the power cord correctly as shown with the mains cable, and turn the switch (Page 6) on. - When you connect the power, the TV set comes into standby mode and the LED indicator (Page 5) lights red. - You could bring the TV out of standby mode by press the POWER button on TV set (page 5) or remote control(page 7), and the LED indicator lights green.
Connection AV Input Connection Note: All cables shown are not included with the TV. HDMI VGA PC Y audio in Pb Pr VIDEO L R Audio in RCA Video Cable RF RCA Audio Cable DVD or VCR - Connect the VIDEO and AUDIO output jacks on the DVD or VCR to the AV IN jacks on the TV set with a RCA cable. - Match the jacks colors: Video=yellow, Audio left=White, Audio right=red. - Turn on the DVD/VCR, and select “AV” in the input source menu. YPbPr Connection Note: All cables shown are not included with the TV.
Connection HDMI Connection Note: All cables shown are not included with the TV. HDMI VGA PC Y audio in Pb Pr VIDEO L R Audio in RF DVD or VCR - Connect the HDMI jack on the DVD to the HDMI jack on the TV set with a HDMI cable. - Turn on the DVD, and select “HDMI” in the input source menu. - HDMI(High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard. One jack supports both video and audio information.
Basic Operation Basic Operation Power on/off 1. Connect to the power with a power code, and turn on the switch(page9). 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press TV/AV button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or ∧ / ∨ button on remote control to select the input source, press OK button on the remote control to enter.
Basic Operation Basic OSD Menu operation Press MENU button to display the OSD menu as below: Main menu Picture, Audio, Time, Setup, Lock, Channel Submenu (Picture menu for example) Hint you should operate the OSD menu according to the hint. Use < / > button to select the main menu, and press ∨ button to enter the submenu.
OSD Menu OSD Menu 1. Picture menu Description Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture. Color: Adjust color of the picture. Tint: Control the fresh tones to make them appear natural. Sharpness: Set the amount of fine detail in the picture.
OSD Menu 2. Audio menu Description Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. Audio Language: Select audio language.
OSD Menu 3. Time menu Description Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or deactivate this function. Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time: Select between On and Off. Clock: Modify date and time.
OSD Menu 4. Setup menu PC SETUP Closed Caption Description Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle. PC SETUP: If the video input signal comes from your PC, you may adjust the V-Position, H-Position, Frequency, Phase or even perform an Auto adjustment.
OSD Menu 5. Lock menu You must enter the password to gain access to the Lock menu. The default password is 0000. You may modify the following options: Description Change password: Change the password, you must enter the new password twice to confirm it. Note: Do not forget the password. Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below don’t work. This option menu allows you to lock any TV channel or adjust the Movie rating filter.
OSD Menu 6. Channel menu Description Air/Cable: Allow you to select antenna between Air and Cable. If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel Label and DTV Signal) are unable to use. Auto Scan: Enter the Auto Scan menu to start auto scan. ★ If you select “Cable” as input signal in Antenna item, allows you to select Cable System among: Auto, STD, IRC and HRC. Use ∨ button to highlight the “Start to Scan”, then press > button to search the channels automatically.
OSD Menu Show/Hide: Allow you to show or hide the channels. Use ∧ / ∨ button to highlight the desired item, then press OK button to show or hide the highlighted channel. Channel No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel. Press < / > button to select the position of the table, and press ∧ / ∨ button to select the words. DTV Signal: Show the quality of digital signal: good, Normal, Bad.
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control.
Technical Specifications Technical Specifications LCD Panel Input Connector Panel Size 21.6 inch(diagonal) Brightness 300 cd/m2 Contrast 1000:1 Resolution 1920x1080 Video 1 Audio(L/R) 1 VGA 1 PC Audio 1 HDMI 1 YPbPr 1 RF 1 Power Source AC100-240V 50/60Hz Power Consumption 60W The cabinet design and electronics specifications will be modified without prior notice for improving the performance.
VIORETM LIMITED WARRANTY FLAT PANEL TELEVISION This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VIORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.