TH VIREO TECHNOLOGY & INNOVATION OPERATING INSTRUCTIONS 22” 1080p LCD Television LC22VF59 AIR MODE SELECTION The Irrevocable menu option is set to the “CABLE” (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the “Air mode. Please refer to page 19 of the owner's manual for the details of this menu. FOR QUESTIONS OR TECHNICAL SUPPORT Please call: 1-877-777-1428 Please do not return this TV to the store.
Contents Contents Caution 2 Safety Information 3 Unit and Accessories 4 Product Feature 4 Introduction 5-8 1. Front View 5 2. Rear View 6 3. Remote Control 7-8 Connection 9-11 Basic Operation 12-13 OSD Menu 14-20 1. Picture menu 14 2. Audio menu 15 3. Time menu 16 4. Setup menu 17 5. Lock menu 18 6.
Caution 3124140 €Iv. Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of UN-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.
Safer In [intimation Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety « The TV set should only be connected to a mains supply which matches that stated on the label on the mains adapter « To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Unit and Accessories and Product Feature Unit and Accessories User’s Manual User's manual Remote control Mains Cable Batteries: 2xAA Product Feature Inputs: RF, VIDEO, VGA, Ypres, HDMI Audio Input: AV Audio R/L.
Introduction Introduction 1. Front View O00 MENU CH. CH+ VOL. VOL+ JETWAY POWER 1 o Led Indicator O Remote Control window {Keep clear) (IR) Infrared Receiver: Receives IR signals from the remote control. (Power Indicator: Press POWER to turn on and off. Indicator on(Red) Standby mode Indicator on{Green) Power on mode The effective receiving range for the signal is 5-8 meters from the front of the remote control window, and 30° to the left or right side and 20° above or below the remote control window. Ca 2.
Introduction 2. Rear View ° ° [LH] 8 SWITCH w——11 Ve { 1AC POWER IN HOME VGA PC audio POWER IN: Connect to an earth AC outlet with the Power Cable. . HDMI: Connect it to the HDMI of DVD or other equipment. VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC. . PC AUDIO: Connect it to the audio output terminal of PC. Ypres: Connect them to the Ypres video output terminal of DVD (used in Ypres source} . VIDEO: Connect it to video output terminal of DVD.
Introduction 3. Remote Control The remote control is using Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER(red button) Turn the TV standbys. © LATVIA Press splay the input source menu. CC. Press fo display the closed caption, MTS. Press to select the audio channels, FAV. Press to add or remove favorite channel, EPG Press to enter the EPG menu directly.
Introduction installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AA size batteries observing the polarity markings inside the battery compartment. Don't mix different types or used batteries with new ones. 3. Close the cover. A Batteries shall not be exposed to excessive heat such as sunshine or fire. The remote control should be operated within 30 feet) and 30° to the left and right of the IR receive at the front of the LCD TV.
Connection Connection Power Cord Connection Connect the power cord correctly as shown with the mains cable, and turn the switch (Page 6) on. When you connect the power, the TV set comes into standby mode and the LED indicator (Page 5) lights red. You could bring the TV out of standby mode by press the POWER button on TV set (page 5) or remote control{page 7), and the LED indicator lights green.
Connection AV Input Connection Note: All cables shown are not included with the HOM VGA VIDEO L R audio in a g Audio in RCA Video Cable RCA Audio Cable i Goo Boss ge DVD or VCR i Cote the VIDEO sang the wv oe = Match the Tacks lots. Videophone, Audio left=w judo rif { Turn on the DIVORCE and select ‘AV. in the put solitaire men Ypres Connection Note: Ali cables shown are not included with the TV.
Connection HDMI Connection Note: All cables shown are not included with the HOME VGA PCY Pb Pr DIVED Lo Rr RF audio in Audio in =r 5-0) DVD or VCR Elvin PC Connection Note: All cables shown are not included with the HDMI VGA PCY VIDEO LL RE audio in Audio using a sound card, adjust the 5 ree PC sound as required. — Set the video resolution of your | gio x 1e0. 1024x768,60Hz on its 540 x 480, 75 He original monitor.
Basic Operation Basic Operation Power on/off 1. Connect to the power with a power code, and turn on the switchblade. 2-Thereunto TV Press POWER button on the TV or remote control. To turn off the TV Press POWER button on the TV or remote control. Input Source select : Press TV/AV button on the TV set or remote control to display the input LE source menu, and use CH+/button on the TV set or A/V button on remote control to select the input source, press OK button on the remote control to enter.
sic Operation Basic OSD Menu operation Press MENU button to display the OSD menu as below: a Ean oy at Carol SL Ee Use < / > button to select the main menu, and press V' button to enter the sub menu. In the sub menu, use V button to select the function item, and you could: adjust ("Contrast" item in Picture menu for example) with < / > button; select ("Picture Mode" item in Picture menu for example) with < / > button; enter the sub menu ("Close Caption" item in Setup menu for example) with > button.
OSD Menu OSD Menu 1. Picture menu Picture Mode he eel Gl ely Tat Sdn Eh Ll Description Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture Color: Adjust color of the picture. Tint: Control the fresh tones to make them appear natural.
OSD Menu 2. Audio menu . 2 . Tie Treble sl Ee < 43d CASTE at SRL Description Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. Audio Language: Select audio language.
OSD Menu 3. Time menu ind : : BE Shea RS Off os Time Zorn Pacific » Eo TILT Description Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or deactivate this function. Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time: Select between On and Off. Clock: Edify date and time.
OSD Menu 4, Setup menu ol er ch Rie i « i Fon ed DUE PERT LTS Re oie essay Closed Caption Description Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle.
OSD Menu 5. Lock menu You must enter the password to gain access to the Lock menu. The default password is You may modify the following options: Tenet So us Lance WRT footing a Description Change password: Change the password, you must enter the new password twice to confirm it. Note: Do not forget the password. Lock: Allow you to tum on or off the system lock. If deactivated, the functions described below don’t work This option menu allows you to lock any TV channel or adjust the Movie rating filter.
OSD Menu 6. Channel menu | : For : COLOR TV BROADCASTING SYSTEM a : County Solar Standbys Sound Pesto aa Ln pil OPPORTUNISTICALLY PAL 8G BALKANS(KOSOVO, BOSNIA) PAL sic Pe .
OSD Menu Show/Hide: Allow you to show or hide the channels. Use A/V Hutton to highlight the desired item, then press OK button to show or hide the highlighted channel. Channel No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel. Press < / > button to select the position of the table, and press A / V button to select the words. DTV Signal: Show the quality of digital signal: good, Normal, Bad.
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions. Remember to check the peripherals pinpoint the source of the failure. If the display still fails to perform as expected, connect your helpline for assistance. No power Check all connections to the TV. Press either the power button or the Standby button on the Remote control.
Technical Specifications Technical Specifications 21.6 inch(diagonal} 300 CD* 1000:1 1820x1080 AC100-240V 50/60Hz 80W The cabinet design and electronics specifications will be modified without prior notice for improving the performance.
VIORE™ LIMITED WARRANTY FLAT PANEL TELEVISION This VIREO brand Product. as supplied and distributed by VIREO and delivered new in the original carton to the origin purchaser is warranted by VIREO against manufacturing defects in materials and workmanship for a limited warranty period of ane (1) year on parts and favor. However, there will be only a 90 day parts and labor limited warranty for commercial use.