ORE TM TECHNOLOGY 24"I080p & INNOVATION LCD Television LC24VF60 AIR (TV)/CABLE MODE SELECTION The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the "Air" mode. Please refer to page 17 of the owner's manual for the details of this menu. Ver.
Contents Contents Caution Safety Information 2 3 Unit and Accessories Product Feature 4 4 Introduction 1. Front View 2. Rear View 3. Instruction for Wall Mount 4. Remote Control 5-9 5 6 7 8-9 Basic Operation 10-11 OSD Menu 1. Picture menu 2. Audio menu 3. Time menu 12-18 12 13 14 15 16 17-18 4. Setup menu 5. Lock menu 6.
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information To ensure reliable and safe operation of this equipment, please read carefully instructions in this user guide, especially the safety information below. Electrical all the safety The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor To prevent overload, don't share the same mains supply socket with too many other items of equipment. -Do not place any connecting wires where they may be stepped on or tripped over.
Unit and Accessories and Product _._ Feature ............... ...................................... oo T --'-'-"----- TV set Quick Start Guide User's Manual Power Cord User's manual Remote control Batteries: 2xAAA Product Feature • • • • • 23.
Introduction Introduction 1. Front View r /oooooo MENU CH- CH+ VQL_ VQL+INPUT P E o Led Indicator "o,_, ,~** . ,_, i _1_ I 1). (IR)Infrared Receiver: (Power on/Standby)LED Indicator on(Red) Indicator on(Green) _O Remote Control window . f r (Keep ., clear) Receives IR signals from the remote control. Indicator: Press POWER to turn on and off.
Introduction 2. Rear View o o 0 0 AC POWER IN Service 0 HDMI1 HDMI2 VGA PC-IN 4 5 Y I 2 1).AC POWER Pb I,I 3 6 IN: Connect to an earth 100-240V- 2). 3). 4). 5). 6). 7). 8). 50/60Hz Pr Video L-in R-in RF I 7 Headphone I 8 9 10 outlet with the Power Cable. Service : For service use only (software update). HDMII/2: Connect it to the HDMI output of the external devices. VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
ln_oduc_on 3. Instruction for Wall Mount A wall mount kit (purchased separately) would allow you to mount your VIORE TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. VIORE is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting.
Introduction 4. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don't mix different types or used batteries with new ones. 3. Close the cover. Batteries shall not be exposed - The remote control should be operated IR receive at the front of the LCD TV. - Used batteries should be disposed to excessive within 30 feet(7m) properly.
Basic O_eration Basic Operation Power on/off 1. Connect to the power with a mains cable. 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or A / V button on remote control to select the input source, press OK button on the remote control to enter.
Basic O_eration Basic OSD Menu operation Press MENU button to display the OSD menu as below: Use < / > button to select the main menu, and press V button to enter the submenu. In the submenu, use A / V button to select the function item, and you could: adjust ("Contrast" item in Picture menu for example) with < / > button; select ("Picture Mode" item in Picture menu for example) with < / > button; enter the submenu ("Close Caption" item in Setup menu for example) with > button.
OSD Menu OSD Menu 1. Picture menu Picture mode: Select between Standard, Dynamic, Mild, Power Saving, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Note: when select the "Power Saving'; the machine is in energy-saving status. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture. Color: Adjust color of the picture.
OSD Menu 2. Audio menu Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. SPDIF Type: Select spdif type between PCM and RAW. Audio Language: Select audio language.
OSD Menu 3. Time menu Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, deactivate this function. Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. or Daylight Saving Time: Select between On and Off. Clock: User can not change time manually during DTV mode, for time is from signal source directly.
OSD Menu 4. Setup menu Menu Language: Select Transparency: Turn on Zoom Mode: Select the 4:3, 4:3 zoom. Noise reduction: Select OSD menu language. or off the transparency menu function. zoom mode between 16:9, 16:9 zoom, the noise reduction mode between Strong, Off, Weak and Middle. PC SETUP: If the video input signal comes from your PC, you may adjust the V-Position, H-Position, Clock, Phase or even perform an Auto adjustment.
OSD Menu 5. Lock menu You must enter the password You may modify the following to gain access to the Lock menu. The default password options: is 0000. Change password: Change the password, you must enter the new password twice to confirm it. Note: Do not forget the password. System Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below don't work. This option menu allows you to lock any TV channel or adjust the Movie rating filter.
OSD Menu 6. Channel menu Air/Cable: Allow you to select antenna between Air and Cable. If you selet "Cable", the following items(Favorite, Show/Hide, and DTV Signal) are unable to use. Auto Scan: Enter the Auto Scan menu to start auto scan. Channel NO, Channel Ylr If you select "Cable" as input signal in Antenna item, allows you to select Cable System among: Auto, STD, IRC and HRC. Use V button to highlight the "Start to Scan", then press > button to search the channels automatically.
OSD Menu Show/Hide: Allow you to show or hide the channels. Use A / V button to highlight the desired OK button to show or hide the highlighted Channel item, then press channel. No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel. Press < / > button to select the position of the table, and press A / V button to select the words. DTV Signal: Show the quality of digital signal: good, Normal, 18 Bad.
Sim_le Troubleshootin_ Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform No power - Check all connections as expected,connect your helpline for assistance. to the TV. - Press either the power button or the Standby button on the Remote control.
Technical S_eci#cations Technical Specifications 24 inch (diagonal) 250 cd/m 2 1000:1 1920x1080 1 1 1 1 2 1 1 1 100-240V- 50/60Hz 60W * Product specifications and appearance are subject to change 20 without notice.
VIORE TM LIMITED WARRANTY FLAT PANEL TELEVISION This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VlORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.
VIORE, Inc.
