ORE". _o..o_ooY_ ,N.O_.,ON 32" Commercial Grade HD LCD Television LC32VHSHTL AIR (TV)/CABLE MODE SELECTION The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the "Air" mode. Please refer to page 17 of the owner's manual for the details of this menu.
Contents Contents Caution Safety Information 2 3 Instructions 4 for fixing stand Unit and Accessories Product Feature 5 5 Introduction 1. Front View 2. Rear View 3. Remote Control 6-9 6 7 8-9 Basic Operation 10-11 OSD Menu 1. Picture menu 2. Audio menu 3. Time menu 12-20 12 13 14 15 16 17-18 4. Setup menu 5. Lock menu 6.
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Injbrmation Safety Information To ensure reliable and safe operation of this equipment, please read carefully instructions in this user guide, especially the safety information below. Electrical all the safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor • To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Instructions _br jixing stand Instructions for fixing stand Note: the pictures below are only for reference B A 1 1. Insert stand(part A) into unit(part B). 2 5xM4x15 2. Screw the stand in the position as the picture shows. Screws (5 x 2836/M4 x 20) are provided with stand.
Unit and Accessories and Product Feature Unit and Accessories u= TV set Stand Security Cover User's Manual User's manual Remote control Batteries: 2xAAA Screws for security 44 Mains cable plate(3xST4x20C) .
Introduction Introduction 1. Front View _0 go _0 sO _o _o x_ ;o ! Power Indicator Remote Control window (Keep clear) 1. (IR) Infrared Receiver: (Power on/Standby)LED Indicator Indicator Receives IR signals from the remote control. Indicator: Press Power Button to turn on and off.
Introduction 2. Rear View & Service _ _2_ _ IIE_la_l ...... oo._× 1. 2. AC POWER IN: Connect to an earth 100-240V, 50/60Hz POWER SWITCH: Switch on or off the power suply. 3. 4. 5. 6. 7. HDMII/2: Connect them to the video output terminal of DVD.(used in HDTVl mode) PC AUDIO IN: Connect it to the audio output terminal of PC. VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC. YPbPr : Connect them to the video output terminal of DVD.(used in HDTV mode).
Introduction 3. Remote Control The remote control is usin9 Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don't mix different types or used batteries with new ones. 3. Close the cover. Batteries shall not be exposed - The remote control should be operated IR receive at the front of the LCD TV. - Used batteries should be disposed to excessive heat such as sunshine within 30 feet(7m) properly.
Basic Operadon Basic Operation Power on/off 1. Connect to the power with a mains cable and an adaptor 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. (page9). Input Source select Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or A / V button on remote control to select the input source, press OK button on the remote control to enter.
Basic Operation Basic OSD Menu operation Press MENU button to display the OSD menu as below: i Use ( / > button to select the main menu, and press V button to enter the submenu. In the submenu, use A / V button to select the function item, and you could: adjust ("Contrast" item in Picture menu for example) with ( / > button; select ("Picture Mode" item in Picture menu for example) with ( / > button; enter the submenu ("Close Caption" item in Setup menu for example) with > button.
OSD Menu OSD Menu 1. Picture menu Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture. Color: Adjust color of the picture. Tint: Control the fresh tones to make them appear natural. Sharpness: Set the amount of fine detail in the picture. Color Temp.
OSD Menu 2. Audio menu Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. Audio Language: Select audio language.
OSD Menu 3. Time menu Sleep timer: You may set the automatic deactivate this function. shutdown timer choosing from 5 to 240 minutes, or Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time: Select between On and Off. Clock: User can not change time manually during DTV mode, for time is from signal source directly.
OSD Menu 4. Setup menu Menu Language: Select Transparency: Turn on Zoom Mode: Select the 4:3, 4:3 zoom. Noise reduction: Select OSD menu language. or off the transparency menu function. zoom mode between 16:9, 16:9 zoom, the noise reduction mode between Strong, Off, Weak and Middle. PC SETUP: If the video input signal comes from your PC, you may adjust the V-Position, H-Position, Frequency, Phase or even perform an Auto adjustment.
OSD Menu 5. Lock menu You must enter the password You may modify the following to gain access to the Lock menu. The default password options: is 0000. Change password: Change the password, you must enter the new password twice to confirm it. Note: Do not forget the password. Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below don't work. This option menu allows you to lock any TV channel or adjust the Movie rating filter.
OSD Menu 6. Channel menu Air/Cable: Allow you to select antenna between Air and Cable. If you selet "Cable", the following items(Favorite, Show/Hide, and DTV Signal) are unable to use. Auto Scan: Enter the Auto Scan menu to start auto scan. Channel NO, Channel "k If you select "Cable" as input signal in Antenna item, allows you to select Cable System among: Auto, STD, IRC and HRC. Use V button to highlight the "Start to Scan", then press > button to search the channels automatically.
OSD Menu Show/Hide: Allow you to show or hide the channels. Use A / V button to highlight the desired OK button to show or hide the highlighted Channel item, then press channel. > No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel. Press < / > button to select the position of the table, and press A / V button to select the words. DTV Signal: Show the quality of digital signal: good, Normal, 18 Bad.
Specialty Specialty Securing Hotel Hotel and Commercial and Commercial Features Features the TV This TV can be secured security plate and lock. to the surface of a desk or table using the included To secure the TV: • Affix the security plate firmly to the surface of a desk or table in the position where you would like the TV to be located using 3xST4x20C type screws.
Specialty Lower the TV carefully Hotel and Commercial onto the security pin. Always Features use 2 or more people for this task. • Lock the TV to the security Swivel Optimum pin using the included lock. Stand viewing angle for your guest. Using the connector security cover This TV includes a metal security cover to restrict access to the TV's connectors. Use of this cover is optional. The cover ships installed on the TV and must be removed prior to cable connection.
Specialty Bend cables downwards Hotel and Commercial Features and tie together • Fix cover in place with provided 4 x security screws and screwdriver. care not to capture cables between TV and cover.
Specialty Hotel and Commercial Features Configuring Hotel Mode settings This TV includes a specialized Hotel Mode Menu that allows you to configure settings for hotel and commercial use. You may restrict users' access to TV features and control channel and volume settings. (1) To enable Hotel Mode: • Press INPUT Source menu appears. • Press numeric keys in sequence 2, 2, 3, 3. Hotel menu as below appears. • Set Hotel Mode Enable setting to "On" using arrow keys.
Specialty Details of settings Hotel and Commercial are below (2) To block access to tuner settings • Set Channel Menu Display to ON. tuner settings cannot be changed. (3) To lock channel to current User cannot access channel • • input Set the source Turn source selection (5) To fix volume • • source is locked to current selection. to a selected User source off level to a selected level between 1-100. Volume is fixed at the User cannot adjust.
Specialty • Hotel and Commercial Features Cloning Support Master TV settings can be easily transferred to multiple guest room TVs using the optional Cloning Tool CLIO0. Please refer to CLIO0 user manual for details.
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect No power - Check all connections your helpline for assistance. to the TV. - Press either the power button or the Standby button on the Remote control.
Technical Specifications Technical Specifications LCD Panel Panel Size 32" (measured Brightness 450cd/m 2 Contrast BROADCAST ANTENNA Ratio SIGNAL SYSTEM 4000:1 xl SOUND OUTPUT 8W x 2 Max.
VIORE TM COMMERCIAL LIMITED WARRANTY FLAT PANEL TELEVISION This VlORE brand Product, as supplied and distributed by VlORE and delivered new in the original carton to the original purchaser is warranted by VlORE against manufacturing defects in materials and workmanship for a limited warranty period of two (2) years on parts and labor, This Limited Warranty does not apply to store display products and product sold as a "marked down" special, in "as is" condition, "close out", "liquidation sale", "open b
