40" I080p LCD Television LC4OVXF6OSB AIR (TV)/CABLE MODE SELECTION The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the "Air" mode. Please refer to page 25 of the owner's manual for the details of this menu. FOR QUESTIONS Please Please call: OR TECHNICAL SUPPORT 1-877-777-1428 do not return this TV to the store.
• Caution .......................................................................................... 1 • Safety Information ................................................................................ 2 • Names of each part(Front View) / Accessories 3 ...................................................... • Names of each part(Back View) .................................................................... 4 • Mounting on a Desktop / Installation Precautions 5 .................................
The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute risk of electric A a shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected the label. to a mains supply which matches that stated on • To prevent overload, don't share the same mains supply socket with too many other items of equipment. • Do not place any connecting wires where: they may be stepped on or tripped over.
m 4ran _!! _11 zl| _mn _mn L._____J O TV/AV button- Input Source Select Button O POWER button MENU button- O LED Indicator _ Remote ControlWindow OSD Menu Display Button CH+/- button - Channel/Program _,- Button VOL+/- button - Volume + - Button ® The configuration of the components may look different from the following illustration. User's Manual User's Guide Power Cord Remote Control 3 .
_) O HDMI2 jack O AV OUTVIDEOand AUDIO(R/L) _ RF HDMII jack _ AV1 iN VIDEO and AUDIO(R/L) _, AC input jack PCa.d AUDIOjack O S-VIDEO @ SWITCH AV2 iN VIDEO and AUDJO(RIL) O COAXIAL (Digital Audio out} Y,Pb,Pr jack(component} Power on e To turn on the LCD TV Press _ on the buttom of the LCD TV to _ first. ® Be sure to turn off the power and unplug both units from the wall outlet before making 4 any connections.
÷ Your LCD TV can be mounted on a Desktop as shown in the figure above. ÷ This is not floor-standing unit. ÷ Please secure enough space for safe use. (Please refer to A and B.) ÷ Installation of the LCD TV in an improperly ventilated location can cause a fire or damage to the LCD TV due to increased temperature. A (Mounting on a wall) ÷ Contact your dealer to purchase the "Adjustable-angle wall mount" required for wall-mounted installation.
÷ For connecting to ATSC or NTSC broadcasts O ] Wall Jack with F-Connector Coaxial (Round) Antenna Cable external Antenna .... Analog+Digital 75 O Press TV/AV button on the remote control to select TV, then press OK button to confirm. Then you can receive the ATSC/NTSC signal.
÷Functions of remote control buttons The remote control is using Infra-Red (In). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. TV/AV POWER Press to turn the TV on/standb Press to display the input source menu CC Press to display the closed caption MTS Press to select the audio channels. FAV MUTE Press to mute the sound. Press again or press VOL+ to unmute. Press to display teh favorite channels list.
THUMBSTICK (_d T/,4/ _./OK) Allows you to navigate the on-screen menus and adjust the system settings to your preference. MENU Press to display Press to exit form the OSD menu. the OSD menu. TIMER RETURN Press to setup the sleep time among: 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min and off. Press to Return to the previous channel viewed.
1. Check the polarity (+,-) of the batteries in the remote control. 2. Check that the batteries have power. 3. Check that the LCD TV is powered and that it is properly plugged in. 4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the LCD TV. 1. Open the cover completely. 2. Insert the two supplied batteries ( AA, 1.5V). Ensure that the polarities (+ and -) of the batteries are aligned correctly. 3. Silde back the cover.
÷ Connecting to the Composite terminal _._Connection terminals of other equipments differ by manufacturer and model. < VIDEO > t Composite Cable Connect the LCD TV's Composite In terminal to the VCR's Composite Out terminal using the Composite cable. (Make sure the color of the terminals and the color of the cable are the same) ÷ Connecting to the SoVideo terminal < VIDEO > t S-Video Cable TV/AV 1. Turn on the LCD TV and press 2. Use on the remote control.
÷ Connecting to the Composite terminal ÷ In orderto watch Cable TV, Subscribeto your localCable TV companyand installa separate receiver(Set-Top-Box) _..
÷ Connecting to the component terminaJ •_Connection terminals of other equipments differ by manufacturer and model. < DVD > 1. Connect LCD TV's Y, Pb, Pr terminal to DVD's Video Out terminal using the external cable. 2. Connect LCD TV's Audio terminals (left & right) in AV 1 to DVD's Audio Out terminal using the Audio cable. 3. It must match the component connection cable Y, Pb, Pr between the LCD TV and DVD Player.
÷ Connection terminals of other equipments differ by manufacturer and model. PCAudio Cable • Connect LCD TV's PC Input terminal to PC's RGB terminal using the D-Sub cable. • Connect LCD TV's PC Audio terminal to PC's Audio terminal using the Audio cable. Only for PC's with Audio terminal) TV/AV 1. Turn on the LCD TV and press 2. Use to move to"VGA", on the remote control. press OK button to comfirm.
÷ Connecting to the Audio Amplifier and Monitor ÷ Connection terminals of other equipments differ by manufacturer and model. Video Cable
÷ Power on/off m m Press _ on the buttom of the LCD TV to _ first. •To turn the LCD TV on • Press "POWER" button on the LCD TV. •To turn the LCD TV off" Press "POWER" button on the LCD TV. •To turn on/off by remote control ' POWER Press the button of remote control. * You can select between the TV signal and the input signal of other equipments connected to the TV. ° Use this function to switch to the input source you wish to view. Press i button on the remote control.
1. After you turn on the TV and select the input source, you should setup the on-screen menu. 2. Press MENU button to display the on-screen menu. 3. Press 4/I_ button to select the main menu: PICTURE, AUDIO, TIMER, SETUP, LOCK, CHANNEL. 4. Press • button to enter the main menu. PICTURE MENU: AUDIO MENU: Allows you to make adjustments to your picture settings. Allows you to customize the sound options and effects.
The PICTURE menu includes the following options " Picture Mode Cycles among picture display modes: Standard, Dynamic, Mild, Sports, User. Contrast Controls the difference between the brightest and darkest regions of the picture. Brightness Controls the overall brightness of the picture Color Controls the color. Tint Controls the fresh tones so they appear natural. Sharpness Control the amount of fine detail in the picture. Color Temp. Cycles among color modes: Normal, Coot, Warm.
The SOUND menu includes the following options ' Sound Mode Allows you to select among: Flat, Music, Movie, Sports and User. Bass Controls the relative intensity of lower pitched sounds. Treble Controls the relative intensity of higher pitched sounds Balance To adjust the balance of the left and right sound track, or turn off the volume of the left and right sound track. Surround To turn on or off the Surround function. SPDIF Type Allows you to select between PCM and RAW.
The TIMER menu includes the following options " Sleep Timer Allows you to set up the sleep timer among: 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min and off. Time Zone Allows you to set up the sleep timer among: Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time Allows you to turn on or off the daylight saving time.
The SETUP menu includes the following options: ______________________________________________________________________________________ i_iiiiiiiiiiHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH , Menu Language Allows you to select menu language among: English, Frangais, Espadot and Deutsch.
Close Caption Use • button to highlight the Close Caption item, then press • to enter into the following menu_ button CC Mode Allows you to select the CC Mode among: On, Off and CC on Mute.
You should enter the password to enter the Lock menu. NOTE: the factory password is 0000. input 4-digit password The LOCK menu includes the following options " Change Password Use • button to select the "Change Password" item, then press I_ button to enter into the following menu. Input the new 4digit password and input it again to confirm. System Lock Allows you to turn on or off the system lock.
US Use • button to highlight the "US" item, then press • into the following menu. TV button to enter Use • button to highlight the "TV" item, then press • button to enter into the following menu_ Use • and • buttons to select the desired rating and press • button to block or unblock rating. MPAA The Movie rating (MPAA) is used for original movies rated by the Motion Picture Association of America (MPAA) as broadcasted on cable TV and not edited for television.
Canada Use Down button to highlight the "Canada" item, then press RIGHT button to enter into the following menu. Canada English Use LEFT and RIGHT buttonsto G, PG, 14+ and 18+ selectamong: Canada French Use LEFT and RIGHT buttonsto selectamong:E, 13ans+,16ans+ Reset RRT Allows you to reset the RRT setting.
The Channel menu could only be operated in TV source. COLOR TV BROADCASTING AZORES(PORTUGAL) BALKANS(KOSOVO, BOSNIA) BELGIUM/GERMANY/ITALY IRAQ AFGHANISTAN NETHERLANDS/NORWAY SAUDI ARABIA KUWAIT/TURKEY/JORDAN UNITED KINGDOM CZECH/HUNGARY/POLAND RUSSIA U.S.A.
If you select "Cable" as input signal in Antenna item, allows you to select Cable System among: Auto, STD, IRC and HRC. Use • button to highlight the "Start to Scan", then press • button to search the channels automatically. The receivable channels will be stored automatically. When searching channels, press MENU to stop. Favorite Allows you to add these channels which you desired as the favorite channels.
480i _20X480 I 480p 720X480 27
• Do not use other functions that are not mentioned in this user's manual. • In case a problem occurs with your LCD TV, please take the following steps first. • If you still have the problem, turn the power off and contact your dealer or an authorized service center. B i Problem ActiOn i The screen does not appear. Isthe power plug pulled out? Insert the power plug. Press the power button of the remote control.
The cabinet design and electronics specifications improving the performance.
VIORE TMLIMITED WARRANTY FLAT PANEL TELEVISION This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VlORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.
